obd2cartool.com Tech-2-User-Guide
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SECTION VIIA<br />
TECH 2 MAIN MENU & LIVE PLOT<br />
Getting Started<br />
Selecting Getting Started from the <strong>Tech</strong> 2 Main Menu (Figure VIIA-13) reveals the Getting Started Menu<br />
(Figure VIIA-14), which provides an on-line overview of the <strong>Tech</strong> 2 and useful operation information.<br />
The following options are available from the Getting Started Menu.<br />
F0: Tool Controls - Selecting an option from the Tool Controls Menu (Figure VIIA-15) will give you<br />
information on <strong>Tech</strong> 2 help functions, key pad layout, screen contrast control, and soft keys.<br />
F1: Hardware - The Hardware Menu (Figure VIIA-16) offers information on screen display, VCI module<br />
removal, PCMCIA card removal and installation, cables/adapters and power connections, prop rod and<br />
hand straps, and RS-232 and RS-485 ports.<br />
F2: <strong>Tech</strong> 2 Features - This selection displays a vehicle information entry sequence for a fictitious vehicle<br />
(Figure VIIA-17).<br />
F3: Programming <strong>Tech</strong> 2 - This option provides instructions for downloading from a PC to the <strong>Tech</strong> 2<br />
scan tool. Due to a specific sequence of events in the evolution of the <strong>Tech</strong> 2, this option duplicates the<br />
Programming <strong>Tech</strong> 2 function of the Tool Options Menu, as described on page VII-9.<br />
Figure VIIA-13<br />
Getting Started selected on Main Menu<br />
Figure VIIA-14<br />
Getting Started Menu<br />
Figure VIIA-16<br />
Hardware Menu<br />
Figure VIIA-17<br />
<strong>Tech</strong> 2 Features screen<br />
Figure VIIA-15<br />
Tool Controls Menu<br />
2005 <strong>Tech</strong> 2 <strong>User</strong>’s <strong>Guide</strong> VII - 11