26.12.2012 Views

Frans_M_Everaerts_Isotachophoresis_378342.pdf

Frans_M_Everaerts_Isotachophoresis_378342.pdf

Frans_M_Everaerts_Isotachophoresis_378342.pdf

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

EQUIPMENT 225<br />

Fig.7.14. Electrophoretic equipment suitable for isotachophoretic analyses, with an injection system<br />

comparable with the injection block described in section 7.2.5. A counter electrode compartment of the<br />

cylindrical type (Fig.7.8) is used. The narrow-bore tube is wound around a thermostated aluminium<br />

block (Fig.7.12.). Detection is performed with thermocouples (copper-constantan). A pressure system<br />

is applied for rinsing and re-filling the various compartments. This equipment was constructed in 1968<br />

by Verheggen and <strong>Everaerts</strong>.<br />

0.4-0.45 mm. The variations in diameter per unit length are negligibly small. This narrow-<br />

bore tube is clamped by a special clamping device, as discussed in section 7.2.3, in the<br />

injection block, the counter electrode compartment and on both sides of the conductivity<br />

probe. The narrow-bore tube is uninterrupted in the W detector.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!