26.12.2012 Views

Frans_M_Everaerts_Isotachophoresis_378342.pdf

Frans_M_Everaerts_Isotachophoresis_378342.pdf

Frans_M_Everaerts_Isotachophoresis_378342.pdf

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

210 PRACTICAL ASPECTS<br />

9.7. CONVERSION OF DATA MEASURED WITH DIFFERENT DETECTORS<br />

When different apparatus are used at different times, it is sometimes difficult to compare<br />

the results. For thermocouples and conductivity detectors, however, a simple method can<br />

be used to interconvert the results. We can utilize the situation that the signals obtained<br />

from one detector, when represented graphically as a function of the signals of another,<br />

give a nearly straight line. After constructing a calibration graph, all results can then be<br />

converted by means of the conversion graph. This graph is independent of the different<br />

operational systems as it simply represents a conversion of measured temperatures and<br />

conductivities, and so it can be used for all systems.<br />

-<br />

D<br />

Ir,<br />

150 200 250 3&0<br />

t.c.2<br />

Fig.9.11. Conversion graph for two different thermocouples (t.c.1 and t.c.2). * = Anionic species<br />

given in Table 9.4; O= cationic species given in Table 9.4.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!