Composite Materials Research Progress

102
Michaël Bruyneel
Bruyneel M. (2006). A general and effective approach for the optimal design of fiber
reinforced composite structures, Composites Science & Technology, 66, 1303-1314.
Bruyneel M. and Duysinx P. (2006). Note on singular optima in laminates design problems,
Structural & Multidisciplinary Optimization, 31, 156-159.
Bruyneel M., Morelle P. and Delsemme J.P. (2006). Failure analysis of metallic and
composite structures with SAMCEF, NAFEMS Seminar – Materials Modelling,
Niedernhausen near Wiesbaden, Germany, December 5-6.
Bruyneel M., Colson B. and Remouchamps A. (2007). Discussion on some convergence
problems in buckling optimization, to appear in Structural & Multidisciplinary
Optimization
Carpentier A., Michel L., Grihon S. and Barreau J.J. (2006). Buckling optimization of
composite panels via lay-up tables. III European Conference on Computational
mechanics – Solids, Structures and Coupled Problems in engineering, C.A. Mota Soares
et al. (editors), Lisbon, Portugal, 5-9 June 2006.
Chao L.P., Gandhi M.V. and Thompson B.S. (1993). A design-for-manufacture methodology
for incorporating manufacturing uncertainties in the robust design of fibrous laminated
composite structures, Journal of Composite Materials, 27 (2), 175-194.
Chao L.P. (1996). Multiobjective optimization design methodology for incorporating
manufacturing uncertainties in advanced composite structures, Engineering Optimization,
25, 309-323.
Cheng K. (1986). Sensitivity analysis and a mixed approach to the optimization of symmetric
layered composite plates, Engineering Optimization, 9, 233-247.
Cheng G. and Guo X. (1997). ε-relaxed approach in structural topology optimization,
Structural Optimization, 13, 258-266.
Colson B., Remouchamps A. and Grihgon S. (2007). Advanced computational structures
mechanics optimization, 10 th SAMTECH Users Conference, March 13-14, Liège,
Belgium.
Dems K. (1996). Sensitivity analysis and optimal design for fiber reinforced composite discs,
Structural Optimization, 11, 176-186.
Diaconu C.G. and Sekine H. (2004). Layup optimization for buckling of laminated composite
shells with restricted layer angles, AIAA Journal, Vol. 42, No 10, 2153-2163.
Diaz A. and Bendsøe M.P. (1992). Shape optimization of structures for multiple loading
situations using a homogenization method, Structural Optimization, 4, 17-22.
Duvaut G., Terrel G., Léné F. and Verijenko V.E. (2000). Optimization of fiber reinforced
composites, Composite Structures, 48, 83-89.
Duysinx P. (1996). Optimization topologique : du milieu continu à la structure élastique,
Doctoral Thesis, Faculté des Sciences Appliquées, Université de Liège, Belgium.
Duysinx P. (1997). Layout optimization: a mathematical programming approach, DCAMM
Report 540, Technical University of Denmark.
Duysinx P. and Bendsøe M.P. (1998). Topology optimization of continuum structures with local
stress constraints, Int. J. Num. Meth. Engng., 43, 1453-1478.
Fine A.S. and Springer G.S. (1997). Design of composite laminates for strength, weight, and
manufacturability, Journal of Composite Materials, 31 (23), 2330-2390.
Fleury C. (1973). Méthodes numériques d’optimisation des structures, Internal Report SF-19,
Laboratoire d’Aéronautique, Université de Liège.