Composite Materials Research Progress

236
W. Van Paepegem, I. De Baere, E. Lamkanfi et al.
[34] Gagel, A., Fiedler, B. and Schulte, K. (2006). On modelling the mechanical degradation
of fatigue loaded glass-fibre non-crimp fabric reinforced epoxy laminates. Composites
Science and Technology, 66(5), 657-664.
[35] Hull, D. (1999). Fractography: observing, measuring and interpreting fracture surface
topography. Cambridge, Cambridge University Press, 366 pp.
[36] Van Paepegem, W. (2002). Development and finite element implementation of a damage
model for fatigue of fibre-reinforced polymers. Ph.D. thesis. Gent, Belgium, Ghent
University Architectural and Engineering Press (ISBN 90-76714-13-4), 403 p.
[37] Mouritz, A.P. (2003). Non-destructive evaluation of damage accumulation. In: Harris, B.
(ed.). Fatigue in Composites. Cambridge, Woodhead Publishing and CRC Press, 2003,
pp. 242-266.
[38] Audoin, B. and Baste, S. (1994). Ultrasonic Evaluation of Stiffness Tensor Changes and
Associated Anisotropic Damage in a Ceramic Matrix Composite. Journal of Applied
Mechanics 61:309-316.
[39] Kriz, R.D. & Stinchcomb, W.W. (1979). Elastic Moduli of Transversely Isotropic
Graphite Fibers and Their Composites. Experimental Mechanics 19:41-49.
[40] Rokhlin, S.I. and Wang, W. (1992). Double throughtransmission bulk wave method for
ultrasonic phase velocity measurements and determination of elastic constants of
composite materials. J. Acoust. Soc. Am. 91:3303-3312.
[41] van Dreumel, W.H. and Speijer, J.L. (1981). Nondestructive Composite Laminate
Characterisation by Means of Ultrasonic Polar-Scan. Materials Evaluation 39:922-925.
[42] Degrieck J. (1995). Some Possibilities for Non-Destructive Characterisation of
Composite Plates by Means of Ultrasonic Polar Scans. Proceedings First Joint Belgian-
Hellenic Conference on Non Destructive Testing, Patras, Greece, 22-23 May 1995.
[43] Maes, K. (1998). Non-destructive evaluation of degradation in a fibre-reinforced plastic.
Master thesis (in Dutch). Ghent University, Ghent, 105 pp.
[44] Cnudde, V., Masschaele, B., Dierick, M., Vlassenbroeck, J., Van Hoorebeke, L. and
Jacobs, P. (2006). Recent progress in X-ray CT as a geosciences tool. Applied
Geochemistry, 21(5), 826-832.
[45] De Baere, I., Van Paepegem, W. and Degrieck, J. (2007). On the design of end tabs for
quasi-static and fatigue testing of fibre-reinforced composites. Accepted for Polymer
Composites.
[46] De Baere, I., Van Paepegem, W. and Degrieck, J. (2007). Design of mechanical clamps
with extra long wedge grips for static and fatigue testing of composite materials in
tension and compression. Accepted for Experimental Techniques.
[47] De Baere, I., Van Paepegem, W. and Degrieck, J. (2007). On the feasibility of a threepoint
bending setup for the validation of (fatigue) damage models for thin composite
laminates. Accepted for Polymer Composites.