Composite Materials Research Progress
Composite Materials Research Progress
Composite Materials Research Progress
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
206<br />
Giangiacomo Minak and Andrea Zucchelli<br />
[28] Found MS, Lamb JR, Damage assessment of impacted thin CFRP panels, <strong>Composite</strong>:<br />
Part A, 35(9), (2004) 1039–1047<br />
[29] Luo RK, Green ER, Morrison CJ, Impact damage analysis of composite plates,<br />
International Journal of Impact Engineering, 22 , (1999) 435-447<br />
[30] Caprino G, Teti R. Residual strength evaluation of impacted GRP laminates with<br />
acoustic emission monitoring, <strong>Composite</strong>s Science and Technology, 53, (1995) 13-19<br />
[31] Cartié DDR, Irving PE. Effect of Resin and Fibre Properties of Impact and Compression<br />
after Impact Performances of CFRP, <strong>Composite</strong>s Part A, 33 (4), (2002) 483-493<br />
[32] Zhang X, Davies GAO, Hitchings D, Impact damage with compressive preload and<br />
post-impact compression of carbon composite plates, International Journal of Impact<br />
Engineering, 22 , (1999) 485-509<br />
[33] Caprino G, Residual strength prediction of impacted CFRP laminates, Journal of<br />
<strong>Composite</strong> <strong>Materials</strong>,18, (1984) 508-518.<br />
[34] Caprino G, Teti R, de Iorio I, Predicting residual strength of pre-fatigued glass fibrereinforced<br />
plastic laminates through acoustic emission monitoring, <strong>Composite</strong>s Part B,<br />
36 (2005) 365-371<br />
[35] Cesari F, Dal Re V, Minak G, Zucchelli A, Damage and residual strength of laminated<br />
graphite-epoxy composite circular plates loaded at the centre, <strong>Composite</strong>s Part A, 38<br />
(2007), 1163-1173<br />
[36] Symons DD, Davis G, Fatigue testing of impact-damage T300/914 carbon-fibrereinforced<br />
plastic, <strong>Composite</strong> Science and Technology, 60(3), 2000, 379-389<br />
[37] Minak G, Morelli P, Zucchelli A, Fatigue residual strength of laminated graphite-epoxy<br />
circular plates damaged by transversal load, Proceedings of the 12 th European<br />
Conference on <strong>Composite</strong> <strong>Materials</strong>, Biarritz, (2006)<br />
[38] Dunegan HL, Harris DO, Tatro CA, Fracture analysis by use of acoustic emission<br />
Engineering Fracture Mechanics, 1 (1), (1968) 105-110<br />
[39] Shippen NC, Adams DF, Acoustic Emission monitoring of damage progression in<br />
graphite/epoxy laminates, Journal of Reinforced Plastics and <strong>Composite</strong>s, 4(1985)<br />
242-261<br />
[40] Siron O, Tsuda H, Acoustic Emission in Carbon Fibre-Reinforced Plastics <strong>Materials</strong>,<br />
Annales De Chimie et Science des Matériaux, 25, 7, (2000) 533-537,<br />
[41] Mizutani Y, Nagashima K, Takemoto M, Ono K, Fracture mechanism characterization<br />
of cross-ply carbon-fibre composites using acoustic emission analysis, NDT&E<br />
International, 33 (2000) 101-110<br />
[42] Walker JL, Hill E, Workman GL, Russell SS, A Neural Network-Acoustic Emission<br />
Analysis of Impact Damaged Graphite-Epoxy Pressure Vessels, Proceedings of the<br />
ASNT 1995 Spring Conference, Las Vegas (1995) 106–108.<br />
[43] Prosser WH, Waveform Analysis of AE from <strong>Composite</strong>s. Proceedings of the Sixth<br />
International Symposium on Acoustic Emission from <strong>Composite</strong> <strong>Materials</strong> (AECM-6),<br />
San Antonio (1998) 61–70.<br />
[44] Prosser WH, Jackson KE, Kellas S, Smith BT, McKeon J, Friedman A, Advanced,<br />
Waveform Based Acoustic Emission Detection of Matrix Cracking in <strong>Composite</strong>s.<br />
<strong>Materials</strong> Evaluation 53(9),(1995) 1052–1058<br />
[45] Woo SC, Choi NS, Analysis of fracture process in single-edge-notched laminated<br />
composites based on the high amplitude acoustic emission events, <strong>Composite</strong>s Science<br />
and Technology, 67 (2007) 1451-1458