RingMaster Management Guide - Juniper Networks

Monitor Function
You can display a user’s approximate location as follows:
1. On the Find Clients Result screen, click Locate Client (under Manage). RingMaster
retrieves information about the location.
2. If three or more APs have not detected a client within 15 seconds, the Listeners Selection
dialog box appears, displaying a list of APs that have detected the client. You can select up to
six APs from the list. RingMaster uses selected APs to calculate the location of a client.
3. RingMaster displays the approximate location of a client on the floor plan. The location of the
client is indicated with a laptop icon, as shown below.
Approximate Client Location
4. To refresh the list of APs that detect a client, click the (Refresh Listeners) button.
To change the APs used for calculating the location of a client, click the Listeners tab and
select or deselect APs from the list, then click the (Locate) button.
Displaying User Activity
You can display event types recorded for a user. Disassociation events can occur, and users dropped
from a network. These events can indicate a reason why access is barred or performance is slow for a
user. For example, authorization failures occur if a local database or RADIUS server fails to recognize
a user.
To display user activity:
1. On the Find Clients screen, click the Session Details task (under View). RingMaster
retrieves information about a client session.
Copyright © 2011, Juniper Networks, Inc. Monitor Function 125