RingMaster Management Guide - Juniper Networks

5. Click Add to add a report filter. The filter configuration fields are activated.
6. Click Select, and select one of the following from the list:
❑ User Name
❑ IP Address
❑ MAC Address
7. Click the Value field. Erase the text in the field and type a username, IP address, or MAC
address of a user, depending on the selection criterion you specified in step 6.
8. Press Next.
9. Repeat step 5 through step 8 for each user you want to display details for.
174 RingMaster Reports Copyright © 2011, Juniper Networks, Inc.