RingMaster Management Guide - Juniper Networks

More documents

Recommendations

Info

The port numbers used by RingMaster Services must not be used by other applications on the server where RingMaster Services is installed. If port 443 or 162 is used by another application, change the port number for RingMaster Services or for the other application. You can only access this page to change RingMaster port 443 if it was able to get this port. If another application is running, RingMaster Services cannot display this web page. services-conf.xml must be edited manually or you must call TAC. 2. To change the TCP port on which RingMaster Services listens for requests from RingMaster, type or select the port number in the HTTPS Server Port field. The default is 443. When you click Save, all instances of the RingMaster Client lose connection with the service and must re-connect on the new port number. The HTTPS port number is automatically updated for the RingMaster Client and connection is restored. Other clients must use the Monitor Service Select wizard to change the service port and reconnect. 3. To enable RingMaster to re-use an MX configuration to replace an old MX with a new one, select Auto-Config IP Subnet Matching. (For more information about this option, see “Replacing an MX and Reusing the Configuration” in the publication RingMaster Configuration Guide.) 4. The change the UDP port on which RingMaster Services listens for SNMP traps, type or select the port number in the Trap Receiver Port field. The default is 162. 5. To enable RingMaster Services to receive traps, select one or both of the following trap types: ❑ SNMP V1 Traps ❑ SNMP V3 Traps You also must add RingMaster Services as a notification target on each MX. RingMaster Services does not start listening for SNMP notifications from an MX until you add RingMaster Services as an SNMP notification target to the MX. (To configure RingMaster Services as a notification target for an MX, see “Configuring RingMaster Services as a Notification Target” in the publication RingMaster Configuration Guide.) 6. To change the name of the key store file that contains the encryption keys RingMaster Services uses for authentication with RingMaster, edit the name in the File field. The default name is .rmservices_keystore. Caution must be used when editing this. If a change is unsuccessful, you will not be able to start RingMaster Services. You will have to call TAC. 7. To change the password that protects access to the key store file, edit the value in the Password field. 8. To specify the file type for the key store file, select one of the following: ❑ PKCS12 — Public-Key Cryptography Standard number 12. ❑ JKS — Java Key Store, a format used by Java platforms and applications. 10 RingMaster Services Copyright © 2011, Juniper Networks, Inc.
Server Certificate Select Server Certificate from the Setup browser window and view server certificates. RingMaster Services Copyright © 2011, Juniper Networks, Inc. RingMaster Services 11
Page 1 and 2: RingMaster Monitoring and Managemen
Page 3 and 4: About This Guide RingMaster 7.4 Man
Page 5 and 6: Convention Use Bold italic text fon
Page 7 and 8: Agreement are incorporated herein i
Page 9 and 10: 1 RingMaster Services This chapter
Page 11 and 12: Connecting a Client to RingMaster S
Page 13 and 14: Certificate Check RingMaster Servic
Page 15 and 16: RingMaster Services Home Page RingM
Page 17: Setup Tab Server Settings RingMaste
Page 21 and 22: RingMaster Services ❑ RMTS-250
Page 23 and 24: RingMaster Services 5. To prevent R
Page 25 and 26: RingMaster Services 3. To change Po
Page 27 and 28: Access Control Tab RingMaster Servi
Page 29 and 30: User Groups RingMaster Services Use
Page 31 and 32: Plan Management Tab New Plan RingMa
Page 33 and 34: Delete Plans RingMaster Services To
Page 35 and 36: Backup and Restore RingMaster Servi
Page 37 and 38: Deleting a Plan Backup RingMaster S
Page 39 and 40: Alarms Select Maintenance, then sel
Page 41 and 42: Log RingMaster Services Select Main
Page 43 and 44: Threads Select Maintenance, then se
Page 45 and 46: RingMaster Client Preferences This
Page 47 and 48: RingMaster Client Preferences 3. In
Page 49 and 50: RingMaster Client Preferences f. To
Page 51 and 52: Certificate Management RingMaster C
Page 53 and 54: Managing with RingMaster This chapt
Page 55 and 56: Radius Attribute Name Acct-Session-
Page 57 and 58: Configuration/RF Planning View Mana
Page 59 and 60: ❍ Upload MX ❍ Convert Auto AP
Page 61 and 62: Task Review Local Changes Deploy Un
Page 63 and 64: Reports View Managing with RingMast
Page 65 and 66: Managing with RingMaster labels inc
Page 67 and 68: Managing with RingMaster Users can
Page 69 and 70:
3. From the Task list, select Creat
Page 71 and 72:
❑ Snoop Filter ❑ SNMP Under Oth
Page 73 and 74:
Creating Locales Using RF Planning
Page 75 and 76:
1. Select a Location Server from th
Page 77 and 78:
1. Under Create, click Create RF Fi
Page 79 and 80:
1. Click Edit Location Server to di
Page 81 and 82:
. 7. Click Next. Managing with Ring
Page 83 and 84:
Managing with RingMaster If you sel
Page 85 and 86:
Managing with RingMaster ❑ Client
Page 87 and 88:
Network Changes Managing with RingM
Page 89 and 90:
Viewing Policy Changes Managing wit
Page 91 and 92:
Deploying Local Changes Managing wi
Page 93 and 94:
3. In the Tasks panel, select View
Page 95 and 96:
3. From the Tasks, select Image Rep
Page 97 and 98:
Managing with RingMaster 2. In the
Page 99 and 100:
Managing with RingMaster ❑ The We
Page 101 and 102:
Managing with RingMaster This butto
Page 103 and 104:
Monitor Function This chapter highl
Page 105 and 106:
Monitor Function multiple sites man
Page 107 and 108:
Cluster Status Monitoring In the Do
Page 109 and 110:
Monitor Function This table indicat
Page 111 and 112:
Monitor Function ❑ RingMaster pro
Page 113 and 114:
Monitor Function panel is selected,
Page 115 and 116:
Status Monitor or Status Summary De
Page 117 and 118:
Noise Floor Monitor Function If you
Page 119 and 120:
Coverage Hole If you click on Cover
Page 121 and 122:
Monitor Function This dialog allows
Page 123 and 124:
Session Details ❍ View ◆Session
Page 125 and 126:
Locating A User Monitor Function Di
Page 127 and 128:
Traffic Monitor Dashboard Monitor F
Page 129 and 130:
Monitor Function The following scre
Page 131 and 132:
Traffic Details Monitor Function Cl
Page 133 and 134:
Finding a User You can find a user
Page 135 and 136:
Monitor Function You can display a
Page 137 and 138:
View User Performance Statistics Mo
Page 139 and 140:
3. Click Details in the Traffic Sum
Page 141 and 142:
Monitor Function Optimize your netw
Page 143 and 144:
Managing Alarms Fault Management is
Page 145 and 146:
Managing Alarms ❍ Performance ❍
Page 147 and 148:
❍Alarms ◆Event Details ◆Setup
Page 149 and 150:
Managing Alarms You can select seve
Page 151 and 152:
Alarms Database Query Managing Alar
Page 153 and 154:
Detecting Rogue Devices AP radios a
Page 155 and 156:
Figure 1-1. Rogue Detection Algorit
Page 157 and 158:
Detecting Rogue Devices Select OK a
Page 159 and 160:
The approximate location of a rogue
Page 161 and 162:
RF Classification If you click RF C
Page 163 and 164:
Rogue Devices If you click Rogue De
Page 165 and 166:
Clicking on the link provided shows
Page 167 and 168:
Unauthorized Devices If you click U
Page 169 and 170:
Displaying Rogue Details Detecting
Page 171 and 172:
Column Description Channel SSID Dis
Page 173 and 174:
The Client Location screen appears,
Page 175 and 176:
Converting a Rogue into a Third Par
Page 177 and 178:
RingMaster Reports The Reports butt
Page 179 and 180:
RingMaster Reports 4. To generate a
Page 181 and 182:
RingMaster Reports 2. In the Report
Page 183 and 184:
RingMaster Reports Copyright © 201
Page 185 and 186:
7. When the report is generated, cl
Page 187 and 188:
Table 1- 3 lists the sections in an
Page 189 and 190:
Client Summary Report Changes In th
Page 191 and 192:
10. Click Next to generate the repo
Page 193 and 194:
4. To generate a new report, click
Page 195 and 196:
Top APs ❑ Cumulative errors for t
Page 197 and 198:
5. Select parameters for the report
Page 199 and 200:
SmartPass New Reports SMS/Email Not
Page 201 and 202:
RingMaster Reports ❑ Network Plan
Page 203 and 204:
RF Summary Report Changes New colum
Page 205 and 206:
Radio Detail Report Changes New col
Page 207 and 208:
10. When the report is generated, c
Page 209 and 210:
11. When the report is generated, a
Page 211 and 212:
5. Select the scope type of the rep
Page 213 and 214:
1. Click Alarm History in the Tasks
Page 215 and 216:
1. Select the Reports Navigation Ba
Page 217 and 218:
Site Survey Order RingMaster Report
Page 219 and 220:
8. Click Generate to generate the r
Page 221 and 222:
2. In the Organizer panel, select R
Page 223 and 224:
Saving a Report RingMaster Reports
Page 225 and 226:
To schedule and e-mail a report: Ri
Page 227 and 228:
Working with Network Plans A networ
Page 229 and 230:
Working with Network Plans 1. In th
Page 231 and 232:
Configuring AirDefense The AirDefen
Page 233 and 234:
Configuring AirDefense 6. From the
show all

RingMaster Management Guide - Juniper Networks

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?