RingMaster Management Guide - Juniper Networks

Saving a Report
RingMaster Reports
To delete the selected report from the saved reports directory on the server, select a report
and click Delete from the Tasks panel option list.
To save a report to your local hard drive:
1. Select the Reports Navigation Bar button.
2. In the Organizer panel, select a Report Type to display a list of saved reports. Select All in
the Organizer panel to display a list of all saved reports.
3. Select a report from the Saved Reports panel. (If there are no saved reports, the Content
panel displays an empty table.)
4. Choose Reports > View from the Tasks panel option list to display the selected report in your
default browser.
5. Choose File > Save As... from the browser menu.
6. Navigate to the directory in which to save the report.
7. To rename the file, enter a new name in the File name: field.
8. Select the Web page, complete option from the Save as type: list.
9. Click the Save button to save the report. Images used in the report are saved in a folder
named “reportName_files” in the directory selected in Step 6.)
To generate an updated report, select an alarm and click Generate.
Storing a Report on a FTP Server
To store a report locally or on an FTP server in your network:
1. On the Reports page, click Report Settings.
2. To configure the FTP Server Info, you need to enter the following information:
❑ IP Address — The IP address of the FTP server
❑ Port — the default port is 21.
❑ User Name— The username to log into the FTP server (if required).
Copyright © 2011, Juniper Networks, Inc. RingMaster Reports 207