RingMaster Management Guide - Juniper Networks

Selecting Policy Areas
After selecting the Policies tab, selecting Areas in the Tasks panel allows you to select policy areas.
You see a dialog like that below:
Click OK after making selections or Cancel when done.
Configuration Management
Any changes you make to a network in RingMaster are saved in a network plan on the server, but
changes are not applied to the network until they are deployed. You see changes in RingMaster, but
these changes are only present in a network plan until you deploy them to the MXs in a network. You
can apply a configuration to multiple MXs, or deploy changes to a single MX. RingMaster allows you
to deploy changes immediately, or to schedule deployment.
Reviewing Local Changes
Select device(s) with local changes and click Review. You see a dialog like that below:
Examine changes that will be made to an MX. The Review window is a table with expandable rows to
drill down to individual attributes. Created items are green, deleted items are orange, and modified
items are black. Click Print for a copy and Close when done.
Local changes cannot be deployed when network changes are detected. You
must first accept or undo network changes.
80 Managing with RingMaster Copyright © 2011, Juniper Networks, Inc.