service manual ar-203e ar-203e x ar-m200 ar-m201 model ar-5420

More documents

Recommendations

Info

Main Sub code code 50 12 Document off-center adjustment Contents Details of function/operation 18 Memory reverse position adjustment in duplex copy (Only the AR-M201, or the AR-M200 with the RSPF installed) [Function] Used to adjust document scan off-center adjustment. The adjustment modes can be selected by pressing [Exposure mode selector] key (or [ ] [ ] key for the AR-M200/M201). (Adjustment range: 1 – 99, Default: 50) When the adjustment value is increased, the print result is shifted to left. Mode Initial value of duplex setting Display item (AR-M200/ M201) LED (AR-M200/ M201) Platen document scan S-S OC COPY mode lamp SPF document front S-S SPF PRINT mode scan lamp RSPF document back D-S RSPF SCAN mode scan (AR-M200/M201) lamp * When paper is discharged, the shifter is operated. [Operation] The operation is similar to simulation 46-01. [Function] When this simulation is executed, the current set correction value is displayed. Enter the correction value and press [START] key to save the entered correction value. (Correction value range; 1 – 99, Default: 50) For S-D mode front surface print and print of even paged in D-S mode, reverse memory copy operation is performed from the rear edge of documents. When, therefore, the print position adjustment of output images is required, adjust as follows: In the reverse memory coping, when the document scan is made in the arrow direction, the output image is printed from the rear edge of scan image. When, therefore, the print lead edge is shifted, set the reference chart so that the reference position is on the rear edge, and use this simulation to adjust the set value so that the print lead edge is matched. Since printing is made from the image data most lately stored in memory to the lead edge data from the print start position, the image lead edge adjustment is made by changing the end data position stored in memory by the set value of this simulation. Since it is performed by changing the scan end position, the image position adjustment is made by changing the scan end position and the end data stored in memory. The adjustment modes can be selected by pressing [ ] [ ] key. Mode OC memory reverse output position (AR-M201 only) SPF/RSPF memory reverse output position * The initial value of duplex setting is "1to2/Long Edge" for the duplex model, or "2to1" for the simplex model. ∗ When paper is discharged, the shifter is operated. [Operation] The operation is similar to simulation 46-01. AR-203E/5420/M200/M201 SIMULATION, TROUBLE CODES 10 - 29 Display lamp (AR-203E/ Default 5420) AE mode 50 lamp TEXT mode 50 lamp — 50 Initial value of duplex setting Display item LED Default S-D OC COPY mode lamp 50 D-S SPF PRINT mode lamp Document transport direction Document transport direction Scan lead edge Print lead edge Lead edge void (1) Print start position Scan direction Scan rear edge Scan end position (Default: Scan cut by void (1)) 50 Rear edge void Print rear edge
Main Sub code code 50 19 Duplex copy rear edge void adjustment (AR-M201 only) Contents Details of function/operation [Function] Used to adjust the rear edge void amount in duplex copy. When this simulation is executed, the current set value is displayed in 2 digits. (Center value: 50.) The adjustment modes can be selected by pressing [ ] [ ] key. (Adjustment range; 1 – 99) Enter the adjustment value and press [START] key to save the set value and make a copy. (The paper information is cleared for every copy.) When the set value is increased by 1, the void amount is increased by about 0.1mm. Mode Display item LED Default Paper rear edge void amount DEN-B PRINT mode lamp 50 Print start position (Duplex back surface) RRC-D SCAN mode lamp 50 51 02 Resist quantity adjustment * The initial value for duplex setting is "1to2/Short Edge" for the OC setting, or "2to2" for the RSPF setting. ∗ When paper is discharged, the shifter is operated. [Operation] The operation is similar to simulation 46-01. [Function] Used to adjust the contact pressure of the main unit resist roller and the SPF/RSPF resist roller onto paper. When this simulation is executed, the current set value is displayed. The adjustment modes can be selected by pressing [Exposure mode selector] key (or [ ] [ ] key for the AR-M200/M201). Enter the adjustment value with [ ] [ ] key (or [Numeric] key for the AR-M200/M201) and press [START] key to save the set value and make a copy. Mode Display item (AR-M200/M201) LED (AR-M200/M201) Display lamp (AR-203E/5420) Default Main cassette TRAY1 COPY mode lamp AE mode lamp 50 paper feed Main cassette lamp Main cassette lamp (*) 2nd cassette TRAY2 COPY mode lamp AE mode lamp 50 paper feed 2nd cassette lamp 2nd cassette lamp Manual paper feed MFT COPY mode lamp AE mode lamp 50 Manual paper feed lamp Manual paper feed lamp RSPF document SIDE1 COPY mode lamp — 50 paper feed PRINT mode lamp (Front surface) SCAN mode lamp (AR-M200/M201) Main cassette lamp RSPF document SIDE2 COPY mode lamp — 50 paper feed PRINT mode lamp (Back surface) (AR-M200/M201) Main cassette lamp (*) Duplex back DUP-2 PRINT mode lamp TEXT mode lamp 50 surface SCAN mode lamp PHOTO mode lamp (AR-M201 only) Main cassette lamp Main cassette lamp (*): Support for the installation models. For non-installation models, skip. [Operation] (AR-M200/M201) The operation is similar to simulation 46-01. AR-203E/5420/M200/M201 SIMULATION, TROUBLE CODES 10 - 30
Page 1 and 2:
SERVICE MANUAL CONTENTS Parts marke
Page 3 and 4:
At the production line, the output
Page 5 and 6:
8 Power section . . . . . . . . . .
Page 7 and 8:
[2] SPECIFICATIONS 1. Basic Specifi
Page 9 and 10:
4. GDI printer (AR-203E only) Print
Page 11 and 12:
2. Environmental The environmental
Page 13 and 14:
[4] EXTERNAL VIEWS AND INTERNAL STR
Page 15 and 16:
Power save indicator On: Indicates
Page 17 and 18:
4. Motors and solenoids 9 No. Part
Page 19 and 20:
6. PWB unit 9 10 1 4 5 3 7 No. Name
Page 21 and 22:
[5] UNPACKING AND INSTALLATION 1. C
Page 23 and 24:
9) Shake the aluminum bag to stir d
Page 25 and 26:
B. Installing the software Note: Th
Page 27 and 28:
(2) Using the machine as a shared p
Page 29 and 30:
11. Interface A. USB Connector Type
Page 31 and 32:
6) Attach the Scanner motor metal p
Page 33 and 34:
[6] COPY PROCESS 1. Functional diag
Page 35 and 36:
Step-3: Developing (DC bias) A bias
Page 37 and 38:
[7] OPERATIONAL DESCRIPTIONS 1. Out
Page 39 and 40:
3. Laser unit The image data sent f
Page 41 and 42:
(1) Cassette paper feed operation 1
Page 43 and 44:
(3) Conditions of occurrence of pap
Page 45 and 46:
[8] DISASSEMBLY AND ASSEMBLY Before
Page 47 and 48:
10) Attach the main charger. Secure
Page 49 and 50:
2) Remove the screws (4 pcs.), the
Page 51 and 52: C. Assembly procedure CCD core 1) I
Page 53 and 54: 10) Remove the spring, and remove t
Page 55 and 56: 9) Remove each connector and four s
Page 57 and 58: 21) Remove five screws and the grou
Page 59 and 60: 31) Remove the screw, slide the lef
Page 61 and 62: 2) Remove the screw and remove the
Page 63 and 64: 2) Remove the connector. 3) Remove
Page 65 and 66: C. DV blade 1) Peel off the old DV
Page 67 and 68: [9] ADJUSTMENTS 1. Optical section
Page 69 and 70: (AR-M200/M201) To select the adjust
Page 71 and 72: E. Copy density adjustment procedur
Page 73 and 74: 2) Print start position (Duplex bac
Page 75 and 76: Sim No. Sub code Operation 24 15 Sc
Page 77 and 78: Main Sub code code 02 02 SPF/RSPF s
Page 79 and 80: Main code Sub code Contents Details
Page 91 and 92: Main Sub code code 43 04 Fusing tem
Page 93 and 94: Main Sub code code 46 12 Density ad
Page 99 and 100: Main Sub code code 49 01 Flash ROM
Page 101: Main Sub code code 50 06 Copy lead
Page 105 and 106: Main Sub code code 63 02 Black leve
Page 107 and 108: Main Sub code code 66 03 FAX PWB me
Page 109 and 110: Main Sub code code 66 11 300bps sig
Page 111 and 112: Main Sub code code 66 18 DTMF signa
Page 113 and 114: Main Sub code code 66 38 Time setti
Page 115 and 116: Main Sub code code Details of troub
Page 117 and 118: [11] MAINTENANCE 1. Maintenance tab
Page 119 and 120: Program No. 25 Copy effective paper
Page 121 and 122: Program number 19 AE LEVEL ADJUST 1
Page 123 and 124: B. Overall block diagram (AR-M200/M
Page 125 and 126: B. MCU PWB (AR-M200/M201) DHAI-0519
Page 127 and 128: F. Network box and FAX (AR-M200/M20
Page 129 and 130: Signal name Name Function/Operation
Page 131 and 132: 1 2 3 4 5 MCU PWB (Graphic_ASIC sec
Page 133 and 134: 1 2 3 4 5 MCU PWB (Driver section 1
Page 135 and 136: 1 2 3 4 5 MCU PWB (Driver section 3
Page 137 and 138: 1 2 3 4 5 MCU PWB (Connector sectio
Page 139 and 140: 1 2 3 4 5 MCU PWB (Scanner I/F sect
Page 141 and 142: 1 2 3 4 5 MCU PWB (CRUM I/F section
Page 143 and 144: E D C B A MCU PWB (ASIC section) (A
Page 145 and 146: E D C B A MCU PWB (Memory section)
Page 147 and 148: E D C B A MCU PWB (Driver section 2
Page 149 and 150: E D C B A MCU PWB (Noise filter/Pul
Page 151 and 152: E D C B A MCU PWB (IMC2 USB2.0 sect
Page 153 and 154:
E D C B A MCU PWB (Connector sectio
Page 155 and 156:
E D C B A MCU PWB (Scanner I/F sect
Page 157 and 158:
E D C B A MCU PWB (CRUM I/F section
Page 159 and 160:
D. OPERATION PWB (AR-M200/M201) E D
Page 161 and 162:
E D C B A OPERATION PWB (Connector
Page 163 and 164:
4) PC side: Check that the "Simulat
Page 165 and 166:
7) PC side: Double-click "Special (
Page 167 and 168:
5) When the following display is sh
Page 169 and 170:
8) When the following display is sh
Page 171 and 172:
5) Select the folder which includes
Page 173 and 174:
Memo
Page 175 and 176:
CAUTION FOR BATTERY REPLACEMENT (Da
show all

service manual ar-203e ar-203e x ar-m200 ar-m201 model ar-5420

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?