service manual ar-203e ar-203e x ar-m200 ar-m201 model ar-5420

More documents

Recommendations

Info

7) PC side: Double-click "Special (MCU/IMC2/Facsimile)" to develop its sub trees, and select "Upload EEPROM Data Area" in the sub trees. 8) PC side: Enter a desired file name, and select "Save." 9) PC side: When upload is completed, the complete message is displayed. With the above procedure, the EEPROM data acquisition is completed. Data acquired by the EEPROM data acquisition procedure are saved in a file with extension of .eep. 5. Installing procedures Driver installation is made on plug-and-play. 1) Main unit side: Execute simulation No. 49-01 (Flash ROM program write mode). Check that "d" is displayed (or "DOWNLOAD MODE" is displayed for the AR-M200/M201) on the operation panel. (Press and hold [Clear] key and [ZOOM DOWN] key ( ) (or [ZOOM]/[COPY RATIO] key for the AR-M200/M201) together, and turn on the power simultaneously.) 2) Connect the machine and the PC with a USB cable. 3) The [Found New Hardware] display is shown as below. Select [Locate and install driver software (recommended)]. Note: A message to confirm the administrator of the computer is displayed. Press [Agree] button. 4) The [Found New Hardware - DOWNLOAD] display is shown. Click [I don't have the disc. Show me other options.]. AR-203E/5420/M200/M201 FIRMWARE DOWNLOAD PROCEDURES 14 - 5
5) When the following display is shown, select [Browse my computer for driver software (advanced)]. 6) The following display is shown. 7) Press [Browse] button, specify the folder which includes the maintenance tool driver (Maintenance.inf), and press [OK] button. 8) The path to the folder which includes the maintenance tool driver (Maintenance.inf) is displayed. Press [Next] button. 9) When the following display is shown, select [Install this driver software anyway]. 10) When the following display is shown, close [Close] button to complete installation. AR-203E/5420/M200/M201 FIRMWARE DOWNLOAD PROCEDURES 14 - 6
Page 1 and 2:
SERVICE MANUAL CONTENTS Parts marke
Page 3 and 4:
At the production line, the output
Page 5 and 6:
8 Power section . . . . . . . . . .
Page 7 and 8:
[2] SPECIFICATIONS 1. Basic Specifi
Page 9 and 10:
4. GDI printer (AR-203E only) Print
Page 11 and 12:
2. Environmental The environmental
Page 13 and 14:
[4] EXTERNAL VIEWS AND INTERNAL STR
Page 15 and 16:
Power save indicator On: Indicates
Page 17 and 18:
4. Motors and solenoids 9 No. Part
Page 19 and 20:
6. PWB unit 9 10 1 4 5 3 7 No. Name
Page 21 and 22:
[5] UNPACKING AND INSTALLATION 1. C
Page 23 and 24:
9) Shake the aluminum bag to stir d
Page 25 and 26:
B. Installing the software Note: Th
Page 27 and 28:
(2) Using the machine as a shared p
Page 29 and 30:
11. Interface A. USB Connector Type
Page 31 and 32:
6) Attach the Scanner motor metal p
Page 33 and 34:
[6] COPY PROCESS 1. Functional diag
Page 35 and 36:
Step-3: Developing (DC bias) A bias
Page 37 and 38:
[7] OPERATIONAL DESCRIPTIONS 1. Out
Page 39 and 40:
3. Laser unit The image data sent f
Page 41 and 42:
(1) Cassette paper feed operation 1
Page 43 and 44:
(3) Conditions of occurrence of pap
Page 45 and 46:
[8] DISASSEMBLY AND ASSEMBLY Before
Page 47 and 48:
10) Attach the main charger. Secure
Page 49 and 50:
2) Remove the screws (4 pcs.), the
Page 51 and 52:
C. Assembly procedure CCD core 1) I
Page 53 and 54:
10) Remove the spring, and remove t
Page 55 and 56:
9) Remove each connector and four s
Page 57 and 58:
21) Remove five screws and the grou
Page 59 and 60:
31) Remove the screw, slide the lef
Page 61 and 62:
2) Remove the screw and remove the
Page 63 and 64:
2) Remove the connector. 3) Remove
Page 65 and 66:
C. DV blade 1) Peel off the old DV
Page 67 and 68:
[9] ADJUSTMENTS 1. Optical section
Page 69 and 70:
(AR-M200/M201) To select the adjust
Page 71 and 72:
E. Copy density adjustment procedur
Page 73 and 74:
2) Print start position (Duplex bac
Page 75 and 76:
Sim No. Sub code Operation 24 15 Sc
Page 77 and 78:
Main Sub code code 02 02 SPF/RSPF s
Page 79 and 80:
Main code Sub code Contents Details
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Main Sub code code 43 04 Fusing tem
Page 93 and 94:
Main Sub code code 46 12 Density ad
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Main Sub code code 49 01 Flash ROM
Page 101 and 102:
Main Sub code code 50 06 Copy lead
Page 103 and 104:
Main Sub code code 50 19 Duplex cop
Page 105 and 106:
Main Sub code code 63 02 Black leve
Page 107 and 108:
Main Sub code code 66 03 FAX PWB me
Page 109 and 110:
Main Sub code code 66 11 300bps sig
Page 111 and 112:
Main Sub code code 66 18 DTMF signa
Page 113 and 114:
Main Sub code code 66 38 Time setti
Page 115 and 116: Main Sub code code Details of troub
Page 117 and 118: [11] MAINTENANCE 1. Maintenance tab
Page 119 and 120: Program No. 25 Copy effective paper
Page 121 and 122: Program number 19 AE LEVEL ADJUST 1
Page 123 and 124: B. Overall block diagram (AR-M200/M
Page 125 and 126: B. MCU PWB (AR-M200/M201) DHAI-0519
Page 127 and 128: F. Network box and FAX (AR-M200/M20
Page 129 and 130: Signal name Name Function/Operation
Page 131 and 132: 1 2 3 4 5 MCU PWB (Graphic_ASIC sec
Page 133 and 134: 1 2 3 4 5 MCU PWB (Driver section 1
Page 135 and 136: 1 2 3 4 5 MCU PWB (Driver section 3
Page 137 and 138: 1 2 3 4 5 MCU PWB (Connector sectio
Page 139 and 140: 1 2 3 4 5 MCU PWB (Scanner I/F sect
Page 141 and 142: 1 2 3 4 5 MCU PWB (CRUM I/F section
Page 143 and 144: E D C B A MCU PWB (ASIC section) (A
Page 145 and 146: E D C B A MCU PWB (Memory section)
Page 147 and 148: E D C B A MCU PWB (Driver section 2
Page 149 and 150: E D C B A MCU PWB (Noise filter/Pul
Page 151 and 152: E D C B A MCU PWB (IMC2 USB2.0 sect
Page 153 and 154: E D C B A MCU PWB (Connector sectio
Page 155 and 156: E D C B A MCU PWB (Scanner I/F sect
Page 157 and 158: E D C B A MCU PWB (CRUM I/F section
Page 159 and 160: D. OPERATION PWB (AR-M200/M201) E D
Page 161 and 162: E D C B A OPERATION PWB (Connector
Page 163 and 164: 4) PC side: Check that the "Simulat
Page 165: 7) PC side: Double-click "Special (
Page 169 and 170: 8) When the following display is sh
Page 171 and 172: 5) Select the folder which includes
Page 173 and 174: Memo
Page 175 and 176: CAUTION FOR BATTERY REPLACEMENT (Da
show all

service manual ar-203e ar-203e x ar-m200 ar-m201 model ar-5420

Create successful ePaper yourself

Delete template?

Save as template?