30.10.2012 Views

service manual ar-203e ar-203e x ar-m200 ar-m201 model ar-5420

service manual ar-203e ar-203e x ar-m200 ar-m201 model ar-5420

service manual ar-203e ar-203e x ar-m200 ar-m201 model ar-5420

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Main Sub<br />

code code<br />

02 02 SPF/RSPF sensor status<br />

display (Only the AR-203E/<br />

M200/M201 with the<br />

SPF/RSPF installed)<br />

03 SPF/RSPF Motor ON<br />

(Only the AR-203E/M200/<br />

M201 with the SPF/RSPF<br />

installed)<br />

06 Resist clutch ON (SPF)<br />

(AR-203E only)<br />

08 RSPF paper feed solenoid<br />

operation check<br />

(Only the AR-M200/M201<br />

with the RSPF installed)<br />

09 RSPF reverse solenoid<br />

operation check<br />

(Only the AR-M200/M201<br />

with the RSPF installed)<br />

03 03 Shifter operation check<br />

(AR-M200/M201)<br />

Contents Details of function/operation<br />

[Function]<br />

The ON/OFF status of the SPF/RSPF sensors can be checked with the LCD/LED.<br />

When a sensor is ON, the sensor name is displayed on the LCD/LED.<br />

Sensor<br />

Display item<br />

(AR-M200/M201)<br />

Display item<br />

(AR-203E)<br />

Document set sensor SPID TD c<strong>ar</strong>tridge replacement required<br />

lamp<br />

RSPF document transport sensor SPPD Misfeed lamp<br />

RSPF paper feed cover open/close<br />

sensor<br />

SDSW —<br />

RSPF paper exit sensor SPOD —<br />

[Operation] (AR-M200/M201)<br />

1) Initial display 2) When the sensor is ON:<br />

02-02 SPF SENSOR 02-02 SPF SENSOR<br />

SPID SPPD SDSW SPOD<br />

[Function]<br />

When [OK]/[ENTER]/[START] key is pressed, the motor rotates for 10sec at the speed corresponding<br />

to the set magnification ratio.<br />

[Operation] (AR-M200/M201)<br />

The operation is simil<strong>ar</strong> to simulation 01-01.<br />

When the [START] key is pressed, the SPF resist clutch (SRRC) repeats ON (500 ms) and OFF<br />

(500 ms) 20 times.<br />

[Function]<br />

The RSPF paper feed solenoid (SPUS) repeats ON for 500ms and OFF for 500ms 20 times by<br />

the use of the solenoid drive control Bios.<br />

[Operation]<br />

1) Initial display<br />

02-08 SPF SPUS CHK<br />

EXECUTING...<br />

[Function]<br />

The RSPF reverse solenoid (SPFS) repeats ON for 500ms and OFF for 500ms 20 times by the<br />

use of the solenoid drive control Bios.<br />

[Operation]<br />

1) Initial display<br />

02-09 RSPF SPFS CHK<br />

EXECUTING...<br />

[Function]<br />

The shifter is moved back and forth in four reciprocations.<br />

[Operation]<br />

1) Initial display<br />

03-03 SHIFTER CHK<br />

EXECUTING...<br />

AR-203E/<strong>5420</strong>/M200/M201 SIMULATION, TROUBLE CODES 10 - 4

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!