service manual ar-203e ar-203e x ar-m200 ar-m201 model ar-5420
service manual ar-203e ar-203e x ar-m200 ar-m201 model ar-5420
service manual ar-203e ar-203e x ar-m200 ar-m201 model ar-5420
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Main Sub<br />
code code<br />
48 01 Front/re<strong>ar</strong> (main scanning)<br />
direction and scan (sub<br />
scanning) direction<br />
magnification ratio<br />
adjustment<br />
Contents Details of function/operation<br />
05 SPF/RSPF mode sub scan<br />
direction magnification ratio<br />
in copying (Only the<br />
AR-203E/M200/M201 with<br />
the SPF/RSPF installed)<br />
[Function]<br />
Used to adjust the magnification ratio in the main scan (front/re<strong>ar</strong>) direction and sub scan direction.<br />
Enter the adjustment value with [ ] [ ] key (or [Numeric] key for the AR-M200/M201). Press<br />
[START] key to save the set value and make a copy. (When the adjustment value is increased<br />
by 1, the magnification ratio is increased by 0.1%.)<br />
The adjustment mode can be changed by pressing [Exposure mode selector] key (or [<br />
key for the AR-M200/M201). (Adjustment range: 1 – 99, Default: 50)<br />
] [ ]<br />
Mode<br />
Display item<br />
(AR-M200/M201)<br />
LED<br />
(AR-M200/M201)<br />
Display lamp<br />
(AR-203E/<strong>5420</strong>) Default<br />
Main scan direction<br />
F-R PRINT mode TEXT mode lamp 50<br />
magnification ratio<br />
lamp<br />
OC mode sub scan<br />
SCAN SCAN mode PHOTO mode 50<br />
direction magnification ratio<br />
lamp<br />
lamp<br />
[Operation]<br />
The operation is simil<strong>ar</strong> to simulation 46-01.<br />
[Function]<br />
Used to display the current SPF/RSPF mode sub scan direction magnification ratio on the LCD/<br />
display.<br />
When [START] key is pressed, the entered data is acquired and saved into the EEPROM, and a<br />
copy is made. (When the set value is increased by 1, the magnification ratio is increased by<br />
0.1%.)<br />
The adjustment mode can be changed by pressing [Exposure mode selector] key (or [ ] [ ]<br />
key for the AR-M200/M201). (Adjustment range: 1 – 99, Default: 50)<br />
When adjusting the RSPF, the mode is set to "Duplex → Single," single copies of two sheets <strong>ar</strong>e<br />
performed.<br />
For printing, reg<strong>ar</strong>dless of the density mode and the density level,<br />
Density mode = MANUAL<br />
Density level = 3<br />
Mode<br />
Sub scan magnification<br />
ratio adjustment on the<br />
front surface of SPF/RSPF<br />
document<br />
Sub scan magnification<br />
ratio adjustment on the<br />
back surface of RSPF<br />
document (AR-M200/<br />
M201)<br />
Initial value of<br />
duplex setting<br />
Display item<br />
(AR-M200/<br />
M201)<br />
* When there is no document in SPF/RSPF, copy is inhibited.<br />
[Operation]<br />
The operation is simil<strong>ar</strong> to simulation 46-01.<br />
AR-203E/<strong>5420</strong>/M200/M201 SIMULATION, TROUBLE CODES 10 - 25<br />
LED<br />
(AR-M200/<br />
M201)<br />
S-S SIDE1 COPY mode<br />
lamp<br />
D-S SIDE2 PRINT<br />
mode lamp<br />
Display<br />
lamp<br />
(AR-203E)<br />
AE mode<br />
lamp<br />
Default<br />
50<br />
— 50