service manual ar-203e ar-203e x ar-m200 ar-m201 model ar-5420
service manual ar-203e ar-203e x ar-m200 ar-m201 model ar-5420
service manual ar-203e ar-203e x ar-m200 ar-m201 model ar-5420
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Main Sub<br />
code code<br />
66 05 Signal send mode (Soft SW<br />
set value) (Executable only<br />
when the FAX is installed.)<br />
Contents Details of function/operation<br />
07 Image memory content print<br />
(Executable only when the<br />
FAX is installed.)<br />
10 Image memory content cle<strong>ar</strong><br />
(Executable only when the<br />
FAX is installed.)<br />
[Function]<br />
Use to set the signal send mode (Soft SW set value).<br />
Facsimile simulation design specifications.<br />
1 NO SIGNAL 13 7200bps(V34) 25 2400bps(V27ter)<br />
2 33600bps(V34) 14 4800bps(V34) 26 300bps(FLAG)<br />
3 31200bps(V34) 15 2400bps(V34) 27 2100Hz(CED)<br />
4 28800bps(V34) 16 14400bps(V33) 28 1100Hz(CNG)<br />
5 26400bps(V34) 17 12000bps(V33) 29 300bps(V21)<br />
6 24000bps(V34) 18 14400bps(V17) 30 2100Hz(ANSam)<br />
7 21600bps(V34) 19 12000bps(V17) 31 DUMMY RING<br />
8 19200bps(V34) 20 9600bps(V17) 32 NO VOICE ANSWER<br />
9 16800bps(V34) 21 7200bps(V17) 33 NO RING BACK TONE<br />
10 14400bps(V34) 22 9600bps(V29) 34 LINE OFF HOOK<br />
11 12000bps(V34) 23 7200bps(V29) 35 LINE ON HOOK<br />
12 9600bps(V34) 24 4800bps(V27ter)<br />
[Operation]<br />
1) Initial display<br />
SELECT OUTPUT SIGNAL<br />
(2 DIGITS) No.___<br />
2) 2-digit (1-35) with [Numeric] key / [ ] [ ] key / 2sec after<br />
Pressing [ ] key or [ ] key reverses the sequence.<br />
No. (1-35)<br />
1:NO SIGNAL<br />
∗ [Cle<strong>ar</strong>] key: FAX control is terminated.<br />
3) [OK]/[ENTER] key: Send after setting<br />
OUTPUTING SIGNAL SSW<br />
PRESS CLEAR TO STOP<br />
∗ [Cle<strong>ar</strong>] key: Returns to "1) Initial display".<br />
[Function]<br />
Use to print the image memory content.<br />
[Operation]<br />
When print is allowed When there is no print data<br />
After completion of printing,<br />
FAX control is terminated.<br />
[Function]<br />
Use to cle<strong>ar</strong> the image memory content.<br />
[Operation]<br />
..... No. (1-35)<br />
35:LINE ON HOOK<br />
After 2 sec, FAX control is<br />
terminated.<br />
AR-203E/<strong>5420</strong>/M200/M201 SIMULATION, TROUBLE CODES 10 - 35<br />
When print is inhibited<br />
PRINT STORED NO DATA CAN NOT PRINT<br />
When there <strong>ar</strong>e some print data<br />
CLEAR IMAGE MEMORY<br />
After completion of memory cle<strong>ar</strong>, the buzzer<br />
sounds.<br />
CLEARED<br />
PLEASE POWER OFF<br />
Remains unchanged until the power is turned<br />
off.<br />
After 2 sec, FAX control is<br />
terminated.<br />
When there <strong>ar</strong>e no print data<br />
CLEAR IMAGE MEMORY<br />
After completion of memory cle<strong>ar</strong><br />
CLEARED<br />
After 2sec, FAX control is terminated.