service manual ar-203e ar-203e x ar-m200 ar-m201 model ar-5420

Main Sub
code code
46 12 Density adjustment in the
FAX mode (Collective
adjustment) (Executable
only when the FAX is
installed.)
Contents Details of function/operation
13 FAX mode density
adjustment (Normal text)
(Executable only when the
FAX is installed.)
14 FAX mode density
adjustment (Fine text)
(Executable only when the
FAX is installed.)
[Function]
When [START] key is pressed, scan is executed with the entered exposure adjustment value
and the data stored on the FAX side is rewritten into the entered value.
All data of the exposure adjustment values are rewritten into the same value.
For the density adjustment table data, refer to simulation 46-13 (density adjustment (Normal
text) in the FAX mode).
[Operation]
1) Initial display
ADJUST EXP. AUTO
XX
("XX" is the exposure adjustment value of
normal text stored on the FAX side.)
2) Enter a 2-digit value as the exposure
adjustment value.
ADJUST EXP. AUTO
YY
("YY" is the entered exposure adjustment
value.)
[Function]
Scan is started with the exposure adjustment value entered with [START] key, and the stored
data of the selected mode on the FAX side is rewritten into the input value.
Density adjustment value data table
Mode Photo Exposure adjustment value
STD (Normal text) off
Fine (Fine text) on
off
Sfine (Super fine) on
off
When initializing each data: 50
[Operation]
1) Initial display
ADJUST EXP. STD
XX
("XX" is the corresponding exposure adjustment
value of normal text mode stored on the
FAX side.)
2) Enter a 2-digit value as the exposure
adjustment value with [Numeric] key.
ADJUST EXP. STD
YY
("YY" is the entered exposure adjustment
value.)
[Function]
When [START] key is pressed, scan is started with the entered exposure adjustment value and
the data of the selected mode on the FAX side is changed to the entered value.
For the density adjustment value table data, refer to simulation 46-13 (FAX mode density
adjustment (Normal text).)
[Operation]
1) Initial display
3) Scan start (self print)
ADJUST EXP. FINE
XX
("XX" is the corresponding exposure adjustment
value of the fine text mode stored on
the FAX side.)
2) Enter a 2-digit value as the exposure
adjustment value with [Numeric] key.
ADJUST EXP. FINE
YY
("YY" is the entered exposure adjustment
value.)
AR-203E/5420/M200/M201 SIMULATION, TROUBLE CODES 10 - 20
3) Scan is started (self print), and the LED
of [START] key is turned off.
ADJUST EXP. AUTO
SCAN YY
4) Print is started (self print).
ADJUST EXP. AUTO
PRINT YY
After completion of printing, returns to “2)”
display.
3) Scan is started (self print), and the LED
of [START] key is turned off.
ADJUST EXP. STD
SCAN YY
4) Print is started (self print).
ADJUST EXP. STD
PRINT YY
After completion of printing, returns to “2)”
display.
ADJUST EXP. FINE
SCAN YY
4) Print start (self print)
ADJUST EXP. AUTO
PRINT YY
After completion of printing, returns to “2)”
display.