service manual ar-203e ar-203e x ar-m200 ar-m201 model ar-5420

4) Remove the screw and remove the U-turn guide.
Pressure roller section disassembly
5) Remove the three screws, remove the fusing cover lower on
the right side, and open the heat roller section.
2)
3)
5)
2)
4)
6) Remove the screw and remove the PPD2 sensor.
6)
5)
2)
6)
1)
PPD2 sensor
1)
1)
AR-203E/5420/M200/M201 DISASSEMBLY AND ASSEMBLY 8 - 8
7) Remove the plate spring on the right and remove the heater
lamp.
2)
8) Remove the spring, and remove the upper separation pawls (3
pcs.).
9) Remove the E-ring and remove the reverse gate.
3)
1)
1)
Heater lamp
2)
3)
2)
1)