Project Manual 11-210C - Ramapo College of New Jersey

d. Removal of spots, paint and soil from resilient, glaze and unglazed
masonry and ceramic flooring and wall work;
e. Removal of temporary floor protections, clean, wash or otherwise treat
and/or polish, as directed, all finished floors;
f. Clean exterior and interior metal surfaces, including doors and window
frames and hardware, of oil stains, dust, dirt, paint and the like, polish
where applicable and leave without fingerprints or blemishes; and
g. Restoration of all landscaping, roadway and walkways to pre-existing
condition. Damage to trees and plantings shall be repaired in the next
planting season, and such shall be guaranteed for one year from date of
repair and/or replanting.
All construction equipment, materials or supplies of any kind, character or description of value belonging to the
Contractor which remain on the job site for more than thirty (30) days from the date of the Certificate of Final
Acceptance and Completion issued by the College to the Contractor, shall become the absolute property of the College.
It will be disposed of in any manner the College shall deem reasonable and proper.
4.7 Interruptions to Existing Services
4.7.1 All connections to existing services shall be scheduled and coordinated in advance with the College
and done at a time convenient to the College so as not to unreasonably interfere with its operations which means
weekends, holidays, or after business hours. The Contractor is to include costs in the bid proposal for all premium hour
costs related to these connections. Contractor shall assume the highest premium labor rate for this work in preparation
of the bid.
4.8 Non-Regular Working Hours and Workdays
4.8.1 Regular working hours shall be 7:00 a.m. to 3:30 p.m., Monday through Friday. Changes thereto may
be granted with written approval of the Contracting Officer. Any work required to be performed after regular working
hours or on Saturdays, Sundays, or Legal Holidays as may be reasonably required consistent with contractual
obligations, shall be performed without additional expense to the College. Contractor shall obtain approval of the
Contracting Officer for performance of work after regular working hours or on non-regular work days at least 24 hours
prior to the commencement of overtime, unless such overtime work is caused by an emergency.
4.9 Record Documents
4.9.1 The Contractor shall maintain at the site for the College one copy of the Drawings, Specifications,
Addenda, Change Orders and other Modifications, in good order and marked currently to indicate field changes and
selections made during construction, and one copy of approved Shop Drawings, Product Data, Samples and similar
required submittals. These documents shall be available to the Architect and delivered to the Construction Manager
for submittal to the College upon completion of the Work as a record of the Work as constructed.
4.9.2 During construction, the Contractor shall keep an accurate record of all deviations, between work
as shown on drawings and that which is actually installed. Particular attention is directed to invert elevations,
locations of underground lines, change orders, etc. The Contractor shall during the course of the project, mark these
drawings with colored pencils. All buried utilities outside the building shall be located by a metes and bounds survey
performed by a licensed surveyor who shall certify as to its accuracy. These marked-up drawings and surveys shall be
made available to the Contracting Officer at any time during the progress of the work, upon its request. These shall
include the drawings of principal sub-contractors as well.
RCNJ Project No.: 09-270.1C - 17 -