Project Manual 11-210C - Ramapo College of New Jersey

ARTICLE 6
PROJECT SPECIFIC CONDITIONS
6.1 Existing Finishes and Furniture
6.1.1 The Contractor is to protect all finishes in the building by all means necessary to prevent damage.
At a minimum, all floors and doors are to be protected at all times from contractor mobilization onsite through
substantial completion. Wall finishes can be protected area to area when work is being performed. The Contractor
will not be permitted to work in an area unless protection is installed and approved by the Construction Manager.
6.1.2 The Contractor is responsible for damages caused by the Contractor and all Subcontractors to
existing finishes, furniture and equipment as proven by the Construction Manager. The Contractor will be allowed to
repair such damages at his cost as accepted by the Construction Manager, but if repairs cannot be made
satisfactorily, the Contractor will be responsible for replacement costs.
6.1.4 The Contractor is responsible to maintain temporary environment controls within the building
relative to temperature and humidity so not to damage finishes, furniture and equipment.
6.2 Storage of Materials and Equipment
6.2.1 The Contractor will be permitted to store storage trailers containing materials and equipment on
campus in a lot designated by the Construction Manager until such time the equipment and material is needed onsite.
The Contractor is to include all costs related to double handling of such materials and equipment.
6.3 Working Hours
6.3.1 Working hours when the buildings are vacant shall be 7:00 am to 3:30 pm.
RCNJ Project No.: 09-270.1C - 29 -