Lismore to Mullumbimby Electricity Network ... - Essential Energy

Group/Agency Correspondence Concern/Comment Response
Licensing Application Requirements
• Complete the relevant application form in full. i.e. form D
or form N
• A check list (form C) must be submitted with all
applications.
Staged projects, or projects covering a large distance or
scattered over a considerable distance require the applicant to
provide an understanding of the time sequence, locations and
importance of respective stages.
A copy of the Road Occupancy Licence must be kept on site at
all times.
Lismore Shire
Council
Ballina Shire
Council
Email from Carolyn
Moynihan dated 8
April 2010
Letter received from
David Kelly dated
23 March 2010
Completed Temporary Speed Zone Authorisation (SZA)
form(s) must be completed on site and copies returned to the
Traffic Operations Unit after completion of the work.
Council notes the context of your recent correspondence and
has no comments to make regarding your proposal at this
stage.
Heavy Vehicle Routes
I note in Table 5.2 (roadway to be traversed by heavy vehicles)
of your report that you list Fox, Temple and Burnett Streets
being suitable for heavy vehicle routes. Please be advised that
the use of these roads is strongly discouraged. It is preferred
that heavy vehicles travel on gazetted B-Double routes.
A route frequently used by over-sized vehicles travelling
through Ballina is available for south bound vehicles via
Nil additional actions required
Fox, Temple and Burnett Streets provide access to the Ballina
Substation. Heavy vehicles (there is no requirement for B-
Doubles) will be required to provide plant and material to the
substation via the Pacific Highway Heavy Vehicle Route. Kerr
Street already included in Table. Refer Section 5.4 Heavy
Vehicle Routes which lists hierarchy of roads and commitment
for heavy vehicles to travel on Bruxner and Pacific Highways
where possible.