T700 User Guide.pdf - 1 PC Network Inc

ZXV10 T700 User Guide
Dropping a Terminal
1. In the chairman conference control interface, select 8. Conf Management to enter
the conference management interface, and then select 4. Force Exiting. The
corresponding prompt box appears, as shown in the figure below.
Figure 12-14 Dropping a Terminal
2. Select a terminal, and then press the OK button on the remote control to drop the
terminal.
12.3.7.2 Calling/Hanging Up a Terminal
In a conference, the chairman can add one or more terminals that are supposed to join
the conference or have hanged up due to network failure into the terminal list, letting them
attend the conference. The chairman can also hang up one or more terminals attending
the conference. The terminals hanged up are displayed in non-attending terminal list. To
add them into the conference again, the chairman must call them again.
Calling a Terminal
1. In the chairman conference control interface, select 8. Conf Management to enter
the conference management interface, and then select 2. Call Terminal to enter the
corresponding interface.
2. Select a terminal not in the conference with the remote control, and then press the OK
button to call it. If it is successfully called, it will be displayed in the attending terminal
list.
Hanging up a terminal
1. In the chairman conference control interface, select 8. Conf Management to enter
the conference management interface, and then select 3. Hangup Terminal to enter
the corresponding interface, as shown in the figure below.
12-16
SJ-20100910163147-003|2010-11-23(R1.1)
ZTE Proprietary and Confidential