T700 User Guide.pdf - 1 PC Network Inc

Chapter 9 Diagnosis
Audio Input Test
Audio input test is used to detect if the components and interfaces related to the audio
input in the terminal work normally.
In the test interface, press the Start Test button of the audio input test interface by using the
remote controller. In normal situation, the audio input displaying bar changes according to
the volume of the microphone. The numbers indicating volume size will also change along
with it.
Audio Output Test
Audio output test is used to detect if the components and interfaces related to the audio
output in the terminal work normally.
In the test interface, press the Start Test button of the audio output test interface by using
the remote controller. In normal situation, the TV set or sound box connected with the
terminal will keep playing the startup tone of the terminal.
9.7 System Self-diagnosis
Select Management > Diagnosis > Self diagnosis to access the system Self diagnosis
interface by using the remote controller, as shown in the figure below.
Figure 9-11 System Self-diagnosis
The diagnosis items in the figure above are described in the table below.
Diagnosis Items
PS Info
System Info
Network status
ARP Info
Descriptions
Viewing the current process information
Viewing the current usage of the system resources
Indicating the current network status
Indicating the current ARP information
9-9
SJ-20100910163147-003|2010-11-23(R1.1)
ZTE Proprietary and Confidential