T700 User Guide.pdf - 1 PC Network Inc
T700 User Guide.pdf - 1 PC Network Inc
T700 User Guide.pdf - 1 PC Network Inc
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ZXV10 <strong>T700</strong> <strong>User</strong> <strong>Guide</strong><br />
• Check and confirm all cables are connected correctly and firmly as soon as possible<br />
once the terminal and its peripheral equipment are moved to another place.<br />
F.3 Test Maintenance<br />
Test maintenance refers to conduct an overall system test before using the terminal. It is<br />
needed because the terminal is only used in conferences at times and the connections<br />
or functions may not meet requirements after long time. The test maintenance should be<br />
performed at least two or three hours before starting a conference.<br />
Test maintenance is to test the functions of the terminal and its peripheral equipment after<br />
power-on and measure each index of them, so as to ensure they can work normally and<br />
meet the requirements of the conference to be held.<br />
The requirements for test maintenance are as follows:<br />
• If the terminal will not be used for a long time (over a quarter), it is recommended to<br />
conduct the power-on test once in a week. Moreover, additional loopback test and joint<br />
debugging with MCU network should be performed three days before a conference.<br />
After the test, do not power off the terminal and other equipment immediately. Let<br />
them work continuously over three hours and make sure the image and voice are<br />
clear.<br />
• If the terminal is used frequently, it is recommended to perform loopback test before<br />
the day when the conference will be held, and conduct joint debugging with MCU<br />
network two hours before the conference starts.<br />
The test result should meet the following requirements at least:<br />
• Image and sound effect is good.<br />
• The terminal can establish a conference connection and exit the conference normally.<br />
• The terminal can apply for chair token and ask for speech as a non-chair terminal. It<br />
can implement control functions as a chair terminal.<br />
• In case of no chair in a conference, the terminal can get the LSD token and control<br />
far-end terminal remotely.<br />
• The terminal can control local camera(s).<br />
• The terminal can control the volume and implement the mute and dumb functions<br />
normally.<br />
F-2<br />
SJ-20100910163147-003|2010-11-23(R1.1)<br />
ZTE Proprietary and Confidential