T700 User Guide.pdf - 1 PC Network Inc
T700 User Guide.pdf - 1 PC Network Inc
T700 User Guide.pdf - 1 PC Network Inc
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ZXV10 <strong>T700</strong> <strong>User</strong> <strong>Guide</strong><br />
The table below describes the NAT configuration items.<br />
Item<br />
NAT Mode<br />
NAT Address<br />
TCP Port Range<br />
UDP Port Range<br />
IP Addresses 1 to 6<br />
Subnet masks 1 to 6<br />
Keep-alive Period<br />
Description<br />
Selects whether to enable NAT, including Disabled, Static NAT, and<br />
H.460<br />
If Disabled is selected, there is no need to set other parameters.<br />
Static NAT means that a private IP address inside the Intranet is<br />
translated into the corresponding public IP address<br />
H.460 is a group of firewall transversal protocols. Using this protocol<br />
together with an external B200 gateway, the terminal can flexibly<br />
transverse firewalls<br />
Enters a public IP address<br />
Upper and lower limits of the TCP port range. It is recommended to use<br />
the default values<br />
Upper and lower limits of the UDP port range. It is recommended to<br />
use the default values<br />
ZXV10 <strong>T700</strong> Private IP addresses<br />
ZXV10 <strong>T700</strong> Enters corresponding subnet masks<br />
Sets the keep-alive period of the channel between the Intranet and the<br />
Internet<br />
The user can set this value based on the network access frequency,<br />
ranging from 5 to 30, in seconds<br />
7.3 Mic/Line Input Settings<br />
In the main interface, select Management > System Settings > Audio > Mic/Line Input<br />
to open the Mic/Line Input configuration interface, as shown in the figure below.<br />
Figure 7-14 Configuring Mic/Line Input 1<br />
7-14<br />
SJ-20100910163147-003|2010-11-23(R1.1)<br />
ZTE Proprietary and Confidential