T700 User Guide.pdf - 1 PC Network Inc
T700 User Guide.pdf - 1 PC Network Inc
T700 User Guide.pdf - 1 PC Network Inc
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ZXV10 <strong>T700</strong> <strong>User</strong> <strong>Guide</strong><br />
13.5.7 Calling Meeting<br />
Prerequisites<br />
Only an IP terminal has the call meeting function.<br />
The terminals in the address book can join a call meeting only after they are configured<br />
with extension numbers, which are the numbers registered on GK.<br />
Context<br />
Call meeting means that a terminal initiates a conference and makes a conference<br />
request to the MCU. The request contains terminal names, conference rate, conference<br />
password, conference special number, number of pictures, and duration. The specified<br />
MCU checks whether it can satisfy the request based on its board configuration and<br />
template configuration in the conference management system. If yes, MCU will call the<br />
terminals.<br />
The conference templates needs to be configured in the conference administrator<br />
operation interface. The template of call meeting is different from that of a normal<br />
conference. In the template of call meeting, conference name and terminal prefix are<br />
restricted. For more information, refer to ZXMS80 Multimedia Service Management<br />
System Operation Manual (System Administrator Volume).<br />
Steps<br />
1. Select Call Control→Call Meeting. The corresponding interface is shown below.<br />
Figure 13-18 Call Meeting Page<br />
2. Select terminals from the Available Terminal list box, and then click Select. The<br />
selected terminals are displayed in the Selected Terminal list box. If the user clicks<br />
Select all, all the terminals in the Available Terminal list box are selected and<br />
13-18<br />
SJ-20100910163147-003|2010-11-23(R1.1)<br />
ZTE Proprietary and Confidential