Firmware Update - Agilent Technologies

More documents

Recommendations

Info

$Sophisticated peak-based fraction collection – working with up and ...$

1 Introduction Firmware Description Firmware Description The firmware of the instrument consists of two independent sections: • a non-instrument specific section, called resident system, • an instrument specific section, called main system. On the Instant Pilot G4208A this depends on the firmware versions: • all B-revisions have main and resident firmware • all A-revisions use just main firmware The Control Module G1323A/B firmware has just main firmware. Resident System This resident section of the firmware is identical for all Agilent 1100/1200/1290 Series modules. Its properties are: • the complete communication capabilities (GPIB, CAN, LAN and RS-232C), • memory management, • ability to update the firmware of the main system. Main System This main section of the firmware is module specific. Its properties are: • the complete communication capabilities (GPIB, CAN, LAN and RS-232C), • memory management, • ability to update the firmware of the resident system. • In addition the main system comprises the instrument functions that are divided into common functions like • run synchronization through APG remote • error handling, • diagnostic functions, • or module specific functions. 10 1100/1200/1290 Series Firmware Update Guide
Introduction 1 Firmware Description NOTE Update of main system can be done in the resident system only (except the Control Module G1323A/B). Update of the resident system can be done in the main system only. File Naming Convention of Firmware File naming convention of firmware Module Type of firmware Name Pumps, Autosampler, Detectors, Column Compartment Pumps, Autosampler, Detectors, Column Compartment Main Resident xxxxA_Avvv_bbb.DLB xxxxA_Bvvv_bbb.DLB res_Avvv_bbb.DLB res_Bvvv_bbb.DLB G4208A Instant Pilot Main G4208A_Bvvv_bbb.DLB G4208A Instant Pilot Resident RES_xxxxBvvv_bb.DLB G1323A Control Module Main LCAvvvEN.BIN G1323B Control Module Main LCBvvvEN.BIN where (e.g. 1315AB_A511_001.DLB) xxxxA is the product number, for example G1315A/B DAD A is the firmware revision vvv is the revision number, for example 511 is revision 5.11 bbb is the build number, for example 001 is the first build NOTE All modules with on-board LAN (e.g. G1315/65C/D and G1314D/E) and the Instant Pilot require "B" firmware. This “B” firmware works with “A” firmware under specific requirements. See “Compatibility Matrix” on page 18 for details. 1100/1200/1290 Series Firmware Update Guide 11
Page 1 and 2: Agilent 1100/1200/1290 Series Firmw
Page 3 and 4: In This Guide… This manual contai
Page 5 and 6: Content 1 Introduction Firmware Des
Page 7 and 8: 5 Updates via Control Module (G1323
Page 9: 1 Introduction Firmware Description
Page 13 and 14: Introduction 1 Firmware Description
Page 15 and 16: Introduction 1 Procedures Update of
Page 17 and 18: Introduction 1 Updates from the Agi
Page 19 and 20: Introduction 1 Compatibility Matrix
Page 27 and 28: 2 Updates via LAN/RS-232 Firmware U
Page 29 and 30: Updates via LAN/RS-232 Firmware Upd
Page 45 and 46: Setup of the LAN/RS-232 Firmware Up
Page 61 and 62:
Updates via LAN/RS-232 Firmware Upd
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
3 Updates via LabAdvisor / Instrume
Page 87 and 88:
Updates via LabAdvisor / Instrument
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
4 Updates via Instant Pilot (G4208A
Page 97 and 98:
Updates via Instant Pilot (G4208A)
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
5 Updates via Control Module (G1323
Page 115 and 116:
Updates via Control Module (G1323A/
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
6 Updates via GPIB Firmware Update
Page 135 and 136:
Updates via GPIB Firmware Update To
Page 137 and 138:
Page 139 and 140:
Updating the Control Module Firmwar
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
7 Agilent 1100/1200 Modules - A Qui
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
8 Downgrade of Agilent 1100/1200/12
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166:
Index Instant Pilot backward compat
show all

Firmware Update - Agilent Technologies

Create successful ePaper yourself

Delete template?

Save as template?