Firmware Update - Agilent Technologies
Firmware Update - Agilent Technologies
Firmware Update - Agilent Technologies
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
1 Introduction<br />
Compatibility Matrix<br />
1290 Infininty LC<br />
The table below lists the compatibilty requirements for the 1290 Infinity LC<br />
System. Refer also to Figure 6 on page 25 for <strong>Agilent</strong> 1290 Infinity LC<br />
<strong>Firmware</strong> versus ChemStation Revisions.<br />
Table 3<br />
<strong>Firmware</strong>/Software Requirements for 1290 Infinity LC System<br />
1290 Infininty LC System Revision Comment<br />
• G4212A Infinity DAD B.06.23 *<br />
• G4220A Infinity Binary Pump B.06.23 *<br />
• G4226A Infinty ALS A.06.14 *<br />
• G1316C Infinity TCC A.06.14 *<br />
• G4208A Instant Pilot B.02.08 * 1290 release<br />
useable for firmware updates<br />
• <strong>Agilent</strong> 1100/1200 modules B.06.2x modules with on-board LAN<br />
• <strong>Agilent</strong> 1100/1200 modules A.06.1x<br />
• <strong>Agilent</strong> ChemStation B.04.02 *<br />
• <strong>Agilent</strong> LabAdvisor / System Utilities B.01.03 * usuable for firmware updates<br />
• LAN/RS-232 <strong>Firmware</strong> <strong>Update</strong> Tool 2.7 2.6 * useable for firmware updates<br />
* initial revision or revision that supports the 1290 Infinity modules the first time.<br />
NOTE<br />
Due to a new driver concept the initial <strong>Agilent</strong> ChemStation B.04.02 release does not<br />
support all combinations of 1290 Infinity LC System with 1100/1200 modules, see Figure 5<br />
on page 25.<br />
24 1100/1200/1290 Series <strong>Firmware</strong> <strong>Update</strong> Guide
Change language