Firmware Update - Agilent Technologies
Firmware Update - Agilent Technologies
Firmware Update - Agilent Technologies
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Update</strong>s via LAN/RS-232 <strong>Firmware</strong> <strong>Update</strong> Tool 2<br />
Setup of the LAN/RS-232 <strong>Firmware</strong> <strong>Update</strong> Tool<br />
Configure the LAN/RS-232 <strong>Firmware</strong> <strong>Update</strong> Tool<br />
1 Select the button Configure Directories and browse for the location of the<br />
firmware files (e.g. E:\Fwupgrad\LC).<br />
Figure 21<br />
Select the button Configure Directories<br />
Figure 22<br />
Configure Directories<br />
NOTE<br />
The firmware files for the Control Module (G1323B) or Instant Pilot (G4208A) must be in<br />
this firmware directory as well. Otherwise these cannot be upgraded when the modules are<br />
updated (see information on “<strong>Update</strong> Durations” on page 44.<br />
The Protocol file is a text file which gives the complete status of the<br />
firmware update process. This file is useful as a compliance document to<br />
prove that the module firmware files were updated successfully or as<br />
diagnostics information in case of problems, see “The Log-file” on page 61.<br />
Therefore, name the protocol file appropriately.<br />
2 Press OK.<br />
1100/1200/1290 Series <strong>Firmware</strong> <strong>Update</strong> Guide 47