Firmware Update - Agilent Technologies

More documents

Recommendations

Info

$Sophisticated peak-based fraction collection – working with up and ...$

4 Updates via Instant Pilot (G4208A) General Information The firmware of Agilent HPLC modules or the Instant Pilot can be updated using the Instant Pilot and a USB Flash Drive that holds the firmware files in the root directory. Table 7 Firmware Update Tools Module Update via Instant Pilot G4208A LAN/RS-232 Firmware Update Tool 2.7 and a PC with LAN or RS-232 Agilent LabAdvisor Software B.01.03 Instant Pilot G4208A USB Flash Drive via the HPLC system plus CAN HPLC Modules USB Flash Drive plus CAN requires LAN / RS-232 plus CAN The installation of older firmware might be necessary: • to keep all systems on the same (validated) revision, or • if third-party control software requires a special version. To upgrade/downgrade the firmware, 1 Download the firmware and the documentation from the Agilent web (see “Updates from the Agilent Web” on page 16). NOTE The use of the LAN/RS-232 Firmware Update Tool 2.7 is also possible, see Table 7. It is also available via the above-mentioned Agilent web. NOTE If the Instant Pilot is in “Backward compatible mode ON”, see “Coexecution with 3rd Party Control Software” in the Instant Pilot’s User Manual, it will not be seen by the LAN/RS-232 Firmware Update Tool 2.7. In this case reconfigure the Instant Pilot to “Backward compatible mode OFF”. NOTE If the Instant Pilot’s main firmware update failed, the Instant Pilot’s screen stays dark (green LED is on). Refer to“Instant Pilot Screen Is Dark During/After Firmware Update” on page 111. 98 1100/1200/1290 Series Firmware Update Guide
Updates via Instant Pilot (G4208A) 4 General Information 2 Load the firmware into the module(s) as described in “Updating the Firmware Using The Single Mode” on page 100 or “Updating the Firmware Using The Wizard” on page 102. 1100/1200/1290 Series Firmware Update Guide 99
Page 1 and 2:
Agilent 1100/1200/1290 Series Firmw
Page 3 and 4:
In This Guide… This manual contai
Page 5 and 6:
Content 1 Introduction Firmware Des
Page 7 and 8:
5 Updates via Control Module (G1323
Page 9 and 10:
1 Introduction Firmware Description
Page 11 and 12:
Introduction 1 Firmware Description
Page 13 and 14:
Introduction 1 Firmware Description
Page 15 and 16:
Introduction 1 Procedures Update of
Page 17 and 18:
Introduction 1 Updates from the Agi
Page 19 and 20:
Introduction 1 Compatibility Matrix
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
2 Updates via LAN/RS-232 Firmware U
Page 29 and 30:
Updates via LAN/RS-232 Firmware Upd
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Setup of the LAN/RS-232 Firmware Up
Page 47 and 48: Updates via LAN/RS-232 Firmware Upd
Page 85 and 86: 3 Updates via LabAdvisor / Instrume
Page 87 and 88: Updates via LabAdvisor / Instrument
Page 95 and 96: 4 Updates via Instant Pilot (G4208A
Page 97: Updates via Instant Pilot (G4208A)
Page 101 and 102: Updates via Instant Pilot (G4208A)
Page 113 and 114: 5 Updates via Control Module (G1323
Page 115 and 116: Updates via Control Module (G1323A/
Page 133 and 134: 6 Updates via GPIB Firmware Update
Page 135 and 136: Updates via GPIB Firmware Update To
Page 139 and 140: Updating the Control Module Firmwar
Page 145 and 146: 7 Agilent 1100/1200 Modules - A Qui
Page 148 and 149:
7 Agilent 1100/1200 Modules - A Qui
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
8 Downgrade of Agilent 1100/1200/12
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166:
Index Instant Pilot backward compat
show all

Firmware Update - Agilent Technologies

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?