Firmware Update - Agilent Technologies
Firmware Update - Agilent Technologies
Firmware Update - Agilent Technologies
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Update</strong>s via Instant Pilot (G4208A) 4<br />
<strong>Update</strong> Information for A.05.1x <strong>Firmware</strong><br />
Figure 63<br />
<strong>Update</strong> Information for firmware A.05.1x<br />
4 Press the Transfer button. The Instant Pilot will switch into resident mode<br />
(black screen) and the <strong>Update</strong> Tool will list the Instant Pilot.<br />
5 Select the Instant Pilot for update to the target firmware revision<br />
6 Start the update.<br />
7 When finished, the Instant Pilot boots in main mode and shows all modules<br />
of the system in the Welcome screen.<br />
8 Close the connection and the LAN/RS-232 <strong>Firmware</strong> <strong>Update</strong> Tool.<br />
Upgrade from A.05.11 to A.05.1x (new build)<br />
If the Instant Pilot needs to be updated with a new firmware revision A.05.1x<br />
(with new or same build number), follow these steps:<br />
1 Disconnect all 1100/1200 series module from that module that hosts the<br />
LAN/RS-232 interface.<br />
2 Upgrade this module to firmware A.06.xx first (otherwise the Instant Pilot<br />
is not visible in the LAN/RS-232 <strong>Firmware</strong> <strong>Update</strong> Tool).<br />
3 After boot, enter the Maintenance screen and press the Controller button.<br />
4 Press the Transfer button. The Instant Pilot will switch into resident mode<br />
(black screen) and the <strong>Update</strong> Tool lists now the Instant Pilot.<br />
5 Select the Instant Pilot for update to the target firmware revision<br />
1100/1200/1290 Series <strong>Firmware</strong> <strong>Update</strong> Guide 109
Change language