Firmware Update - Agilent Technologies
Firmware Update - Agilent Technologies
Firmware Update - Agilent Technologies
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Update</strong>s via GPIB <strong>Firmware</strong> <strong>Update</strong> Tool 6<br />
Solving Problems<br />
Solving Problems<br />
<strong>Firmware</strong> files are not shown<br />
Configure directories correctly.<br />
Main firmware update was interrupted<br />
If the update of the module’s main firmware was interrupted, the module will<br />
remain in the ‘resident’ mode (the mode for the main firmware update) and is<br />
blinking. A warning pops up.<br />
Select the module which is in resident mode (can be identified by product<br />
number) and select the firmware and restart the update.<br />
<strong>Update</strong> of firmware for MS hardware<br />
After upgrading ChemStation software (e.g. to revision A10.01) the software<br />
complains that the MS firmware needs a newer version.<br />
In this case open your \HPCHEM\MS\firmware\ folder and execute the<br />
MSUPDATE.EXE. This will open a telnet session and start the update of the<br />
MS.<br />
For this update the MS has to be connected to the ChemStation.<br />
<strong>Agilent</strong> Contact<br />
In case you encounter another problem with this <strong>Firmware</strong> <strong>Update</strong> Tool, feel<br />
free to send an e-mail with your findings via the <strong>Agilent</strong> firmware download<br />
page, see “<strong>Update</strong>s from the <strong>Agilent</strong> Web” on page 16 or contact a local <strong>Agilent</strong><br />
Representative. Attach your logfile and details of your system, revision and<br />
errors.<br />
1100/1200/1290 Series <strong>Firmware</strong> <strong>Update</strong> Guide 143