Firmware Update - Agilent Technologies
Firmware Update - Agilent Technologies
Firmware Update - Agilent Technologies
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
5 <strong>Update</strong>s via Control Module (G1323A/B)<br />
Changing the Serial Number of Control Module<br />
Message ‘Serial Number Invalid’<br />
To avoid a "Serial Number Invalid" message during update of Control Modules<br />
that have serial number starting with CN... and software revision B.02.02<br />
installed, you must copy the latest UPDATE.EXE (revision 3.19 or above, dated<br />
03/16/01 or later) onto the same flash card with the B.03.22 or later firmware.<br />
All updates from this card will then be processed the normal way without<br />
showing the described error message.<br />
If the error already occurred, press and type the serial number<br />
printed on the rear side of the Control Module into the shown mask. Then<br />
press and to acknowledge the serial number.<br />
The message should not occur again, after an update to revision B.03.01 or<br />
above.<br />
NOTE<br />
The described problem does not occur during remote updates via PC.<br />
126 1100/1200/1290 Series <strong>Firmware</strong> <strong>Update</strong> Guide