Firmware Update - Agilent Technologies
Firmware Update - Agilent Technologies
Firmware Update - Agilent Technologies
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Update</strong>s via Instant Pilot (G4208A) 4<br />
Errors During <strong>Firmware</strong> <strong>Update</strong>s<br />
Errors During <strong>Firmware</strong> <strong>Update</strong>s<br />
If an error stops the update process, it is displayed.<br />
Figure 64<br />
<strong>Firmware</strong> <strong>Update</strong> Screen - Error during the update<br />
Press Abort to leave the <strong>Update</strong> process.<br />
In the above example all modules stay in resident mode (blinking yellow).<br />
Restart the firmware update again.<br />
Instant Pilot Screen Is Dark During/After <strong>Firmware</strong> <strong>Update</strong><br />
During the firmware update the Instant Pilot has booted in resident mode (to<br />
update the main firmware). In this mode just a basic system is loaded without<br />
the graphics drivers.<br />
After update and reboot into the main mode the screen is back.<br />
If the Instant Pilot’s screen stays dark after a firmware update while the LED<br />
is green, start the LAN/RS-232 <strong>Firmware</strong> <strong>Update</strong> Tool 2.7 and update the main<br />
firmware again.<br />
1100/1200/1290 Series <strong>Firmware</strong> <strong>Update</strong> Guide 111
Change language