Firmware Update - Agilent Technologies

5 Updates via Control Module (G1323A/B)
General Information
NOTE
The G1323B Control Module received it’s last firmware revision B.04.02 in September 2005.
This means that newer Agilent 1100/1200 modules are controllable with some restrictions.
• G1314B Variable Wavelength Detector (*)
• G1314C Variable Wavelength Detector SL (*)
• G1314D Variable Wavelength Detector (*)
• G1314E Variable Wavelength Detector SL+ (*)
• G1316B Thermostatted Column Compartment (*)
• G1316C Thermostatted Column Compartment (*)
• G1329B standard autosampler SL (*)
• G1367B high performance autosampler (*)
• G1367C high performance autosampler SL (*)
• G1367D high performance autosampler SL +(*)
• G1315D Diode Array Detector (DAD) (**)
• G1365D Multiple Wavelength Detector (MWD) (**)
• 1290 Infinity LC System - unsupported
(*) with feature set of the "A" module
(**) with feature set of the "C" module (except for the high data rate)
The RRLC modules G1312B Binary Pump SL and G1316B TCC SL are not supported due to
it's different feature set.
Update Sequence
Using the Control Module, the system should be updated manually in the
following order:
1 Update of Control Module
• G1323A has to be done via PC card and
116 1100/1200/1290 Series Firmware Update Guide