Materials tab - PI-VR GmbH

TrueLightMaterialsMetallicPaintMaterialand its complement specular reflection. The higher the roughness value, the morediffuse reflections will be rendered.» Flake Size: Sets the flake size.» Flake Intensity: Sets the flakes contrast value of each flakes’ normal direction.Clearcoat SettingsSets the clearcoat color. The clearcoat is a transparent, strongly reflective paint layer ontop of the base paint layer.» Clearcoat Color: Sets the clearcoat color.» Reflectivity: Sets the clearcoat reflective intensity.» Fresnel Term Quality: The Fresnel Term describes the intensity of a reflectionbased on the viewing angle. Its intensity at normal incidence is set by the material’sreflectivity.» Fast: Uses a fast but less accurate approximation to the Fresnel Term.» Accurate: Uses a physically accurate approximation to the Fresnel Term.» Use Orange Peel: Activates a noisy bump structure in the shader.» Orange Peel Frequency: Sets the bump structure’s noise frequency.» Orange Peel Intensity: Sets the bump structure’s intensity.For further information regarding Incandescence-, Raytracing-, Transparency- andCommon Settings please read Materials Tab TrueLightMaterials.147