Materials tab - PI-VR GmbH

» Modulesanimation tabCameraEditorAnimation tab: CameraEditorIn the Camera Module, all 3D cameraparameters can be set.Projection Mode» Perspective:The perspective modedraws the current scene in perspectiveview. This mode is the most naturalway of image reception.» Orthographic: Draws the current scenein orthographic view.» Render Wireframe: Renders the selectedcamera view in wireframe mode.ViewingThere are two ways of defining the view. On the one hand the view can be definedusing the attributes “From”, “At” and “Up”. The other way is to define the view by the“Centre of Interest”, “Distance”, “Height” and “Turntable Angle”. Both define positionand orientation. They are interdependent and influence each other.» From: Sets the coordinates for the camera position.» At: Sets the coordinates for the centre of interest.» Up: Sets the up coordinates for the grade.» Centre of Interest (CoI): Sets the coordinates for the centre of interest.» Distance: Sets the distance from the CoI.» Height: Sets the height regarding CoI and distance.» Turntable Angle: Defines the vertical angle related to the focus point.» Distance to Object Centre: Defines the distance to the midpoint of the bounding222