Materials tab - PI-VR GmbH

» Outer Radius: Defines the torus’ outerradius.» Sides: Defines the number of side subdivisions.» Rings: Defines the number of ring subdivisions.Decore: starts a decore process.All geometries fully enclosed byother objects will be selected. Read Appearance GeometryEditor Decore for decore settings.Connector: Using the connector,VRED instances can be synchronizedfor navigation on independentcomputers.» Connect to: Connection settings canbe entered in case this VRED instance isa connection-slave.» Server: Sets the server IP.» Port: Sets the communication portaddress.» Disconnect: Deactivates the connector.» Connect: Activates the connector.» Status: Displays the current connectionslavestatus.» Save Settings: Stores connector-slavesettings. Press the Save Settings button.» Close: Closes the connector dialogbox.» Server: Allows to enter the connectionsettings when the VRED instanceis a connection-server.» Port: Sets the communication portaddress.» Stop: Stops the connection-server.» Start: Starts the connection-server.» Status: Displays the current connectionserver status.» Save Settings: Stores connector-serversettings. Press the Save Settings button.» Close: Closes the connector dialogbox.Connect to the cluster: Startsthe render cluster.For more information regarding cluster settingsread Rendering Cluster.23