MC35i AT Command Set

MC35i AT Command Set5.6 AT+CPWD"IR""AB""AG""AC"BIC-Roam (Bar Incoming Calls when Roaming outside the home country)All Barring servicesAll outGoing barring servicesAll inComing barring services (num)4...8 Length of password. The range of permitted length for a password depends onthe associated . It is available from the test command response,or in the description of parameter . (str)Password specified for the facility.Parameter can be ignored if no old password was allocated to the facility.Take into account that a password may have already been set by factory, or that the service is subject to a passwordissued by the provider. See notes above or contact provider. (str)New password. Mandatory, if was an unblocking key (such as the Master Phone Code).Note• When changing PIN2 (="P2") it is recommended to check the new state of PIN2 by using theAT+CPIN2 command.ExamplesEXAMPLE 1To change PIN2AT+CPWD="P2","0000","8888"(where "0000" = old PIN2 and "8888" = new PIN2)OK PIN2 Password has been changed to "8888"EXAMPLE 2To set password used to enable or disable barring of all outgoing calls:AT+CPWD="AO","0000","3333"OKRequests the network to change the password forsupplementary service "call barring".Usually this request will affect all barring services,even though the request is issued for SupplementaryService BAOC ("Barring of all outgoing calls") only.Refer to the respective network provider for detail.EXAMPLE 3Handling of the "PS" lock passwordAT+CMEE=2Enable text output of CME Error informationAT+CPWD="PS","1111","2222"(where "1111" = old password and "2222" = newpassword)OK Password for facility "PS" is now "2222"AT+CPWD="PS","1111","2222"Repeat command to provoke error "incorrect password"+CME ERROR: incorrect password("1111" is no longer the correct password)MC35i_ATC_V02.00nConfidential / ReleasedPage 107 of 3909/10/08