MC35i AT Command Set

MC35i AT Command Set4.8 AT+CMUX4.8 AT+CMUX Enter multiplex modeMultiplex mode according to the ETSI TS 101 669 and GSM 07.10 enables one physical serial asynchronousinterface to be partitioned into three virtual channels. This allows you to take advantage of up to 3 simultaneoussessions running on the serial interface. For example, you can send or receive data or make a call on the firstchannel, while the other two channels are free to control the module with AT commands.The MC35i module incorporates an internal multiplexer and thus integrates all the functions needed to implementfull-featured multiplex solutions. For the application on top, customers have the flexibility to create their own multiplexprograms conforming to the multiplexer protocol. To help system integrators save the time and expense ofdesigning multiplexer applications, Cinterion Wireless Modules GmbH offers WinMUX2k, a ready-to-use multiplexdriver for Windows 2000 and Windows XP. Another approach is to develop customized solutions basedon the sources of the WinMux2k driver.Refer to [6] which provides a detailed description of the multiplex architecture and step-by-step instructions ofhow to install and configure the multiplex mode. The WinMUX2k driver and its source files can be supplied onrequest. Please contact your local distributor to obtain the latest installation software and user's guide.SyntaxTest CommandAT+CMUX=?Response(s)+CMUX: (list of supporteds)OKRead CommandAT+CMUX?Response(s)+CMUX: OKERROR+CME ERROR: Write CommandAT+CMUX=Response(s)OKERROR+CME ERROR: Reference(s) PIN ASC0 MUX1 MUX2 MUX3 LastGSM 07.07, GSM 07.10 ! % ! ! ! ! %Parameter Description (num)Multiplexer transparency mechanism0 Basic option (num)Subparameters defined in GSM07.07 are adjusted for control and logical channels as follows0 UIH frames used only (control channel)9/10/08MC35i_ATC_V02.00nConfidential / ReleasedPage 86 of 390