MC35i AT Command Set

MC35i AT Command Set3.2 AT+CIND3.2 AT+CIND Indicator controlThe AT+CIND command controls the presentation of Indicator Event Reports related to various functions suchas battery charge level, signal quality, service availability, sound generation, indication of unread short messages,full SMS storage, call in progress or roaming activities.Use of AT+CIND has become outdated. Rather we recommend the more powerful AT^SIND command which iseasier to use and provides additional indicators. All indicators provided by AT+CIND can be handled withAT^SIND as well.AT+CIND supports two ways to get the values related to indicators:• One approach is to query the current status of each indicator by using the read command AT+CIND?. Itreturns the status no matter whether the indicator has been registered with the write commandAT+CIND=[[,[,...]]].• The other way is an event-driven notification based on the "+CIEV" URCs. In this case, the ME will automaticallysend a message to the application, whenever the value of an indicator changes. The application shouldbe designed to react adequately when receiving a URC.The presentation of these URCs depends on two settings:- The indicators must be registered with the write command AT+CIND=[[,[,...]]]. When theME is switched on all of them are in registered mode. Any indicator can be excluded if deregistered with=0. To register or deregister an indicator the AT+CIND write command requires to type the value=1 or 0 exactly at the position where the indicator is located in the list. This is not necessary withAT^SIND which allows to specify indicators by name. See examples below.- The presentation of the registered indicators must be enabled with AT+CMER.SyntaxTest CommandAT+CIND=?Response(s)+CIND: (, list of supported s)[, (, list of supported s)[,...]]OKRead CommandAT+CIND?Response(s)+CIND: [, [, ...]]OKERROR+CME ERROR: Write CommandAT+CIND=[, [, ...]]Response(s)OKERROR+CME ERROR: Reference(s) PIN ASC0 MUX1 MUX2 MUX3 LastGSM 07.07 ! % % % % ! !Parameter Description (num) 9/10/08Integer type value, which shall be in range of corresponding MC35i_ATC_V02.00nConfidential / ReleasedPage 57 of 390