MC35i AT Command Set

MC35i AT Command Set8.2 AT+COPSWrite CommandAT+COPS=[, [, ]]Response(s)OKERROR+CME ERROR: Reference(s) PIN ASC0 MUX1 MUX2 MUX3 LastGSM 07.07 § % % % % ! !Parameter Description (num)Status0 Unknown1 Operator available2 Current operator3 Operator forbidden (str)OperatorIf test command: Operator name in long alphanumeric format and numeric format.If read command: Operator name as per .If write command: Operator name in numeric format. (num)(&V)Parameter values 0 and 1 are stored non-volatile in the MC35i.0 (D) Automatic mode; field is ignored.1 Manual operator selectionWrite command requires in numeric format, i.e. shall be 2.Read command returns the current and the currently selected. If no operator is selected, and are omitted.2 Manually deregister from network and remain unregistered until =0 or1 or 4 is selected.3 Set only (for AT+COPS read command).4 Automatic / manual selection; if manual selection fails, automatic mode(=0) is entered ( field will be present). (num)(&W)(&V)0 (&F) Long alphanumeric format of . Can be up to 16 characters long.2 Numeric format of . This is the GSM Location Area Identification (LAI)number, which consists of the 3-digit Mobile Country Code (MCC) plus the 2-or 3-digit Mobile Network Code (MNC).9/10/08MC35i_ATC_V02.00nConfidential / ReleasedPage 149 of 390