MC35i AT Command Set

MC35i AT Command Set3.4 AT+CEERNumber Description27 Destination out of order28 Invalid number format (incomplete number)29 Facility rejected30 Response to STATUS ENQUIRY31 Normal, unspecifiedResource unavailable class34 No circuit/channel available38 Network out of order41 Temporary failure42 Switching equipment congestion43 Access information discarded44 Requested circuit/channel not available47 Resource unavailable, unspecifiedService or option not available class49 Quality of service unavailable50 Requested facility not subscribed55 Incoming calls barred within the CUG57 Bearer capability not authorized58 Bearer capability not presently available63 Service or option not available, unspecifiedService or option not implemented65 Bearer service not implemented68 ACM equal or greater than ACMmax69 Requested facility not implemented70 Only restricted digital information bearer capability is available79 service or option not implemented, unspecifiedInvalid message (e.g. parameter out of range) class81 Invalid transaction identifier value87 User not member of CUG88 Incompatible destination91 Invalid transit network selection95 Semantically incorrect messageProtocol error (e.g. unknown message) class96 Invalid mandatory information97 Message type non-existant or not implemented98 Message type not comaptible with protocol state99 Information element non-existent or not implemented100 Conditional information element error101 Message not compatible with protocol102 Recovery on timer expiry111 Protocol error, unspecifiedMC35i_ATC_V02.00nConfidential / ReleasedPage 67 of 3909/10/08