MC35i AT Command Set

MC35i AT Command Set11.25 AT+FTH11.25 AT+FTH Transmit Data Using HDLC FramingThe AT+FTH command causes the TA to transmit data using the HDLC protocol and the modulation schemesdefined in Section 11.1, FAX parameters. An ERROR response code results if the command is issued while themodem is on-hook. The test command can be used in off-hook mode to check the modulation schemes supportedby MC35i.SyntaxTest CommandAT+FTH=?Response(s)In off-hook mode only:+FTH:(list of s)OKIn on-hook mode:ERRORWrite CommandAT+FTH=Response(s)CONNECTReference(s) PIN ASC0 MUX1 MUX2 MUX3 LastTIA/EIA-578 ! % % ! ! ! !Note• Used for Fax Class 1 onlyMC35i_ATC_V02.00nConfidential / ReleasedPage 249 of 3909/10/08