MC35i AT Command Set

MC35i AT Command Set1.2 Related documents1.2 Related documents[1] MC35i Release Notes, Version 02.00[2] MC35i Hardware Interface Description, Version 02.00[3] MC35i Terminal Hardware Interface Description, Version 02.00[4] GPRS Startup User's Guide[5] Remote-SAT User's Guide[6] Multiplexer User's Guide[7] Multiplex Driver Developer's Guide for Windows 2000 and Windows XP[8] Multiplex Driver Installation Guide for Windows 2000 and Windows XP[9] Application Note 02: Audio Interface Design[10] Application Note 16: Updating MC35i Firmware[11] Application Note 24: Application Developer's Guide[12] ISO/IEC10646: "Universal Multiple-Octet Coded Character Set (UCS)"; UCS2, 16 bit coding[13] ITU-T Recommendation V.24: List of definitions for interchange circuits between data terminal equipment(DTE) and data circuit-terminating equipment (DCE)[14] ITU-T Recommendation V.250: Serial asynchronous automatic dialling and control[15] 3GPP TS 100 918/EN 300 918 (GSM 02.04): General on supplementary services[16] 3GPP TS 100 907 (GSM 02.30): Man-Machine Interface (MMI) of the Mobile Station (MS)[17] 3GPP TS 23.038 (GSM 03.38): Alphabets and language specific information[18] 3GPP TS 27.005 (GSM 07.05): Use of Data Terminal Equipment - Data Circuit terminating Equipment (DTE- DCE) interface for Short Message Service (SMS) and Cell Broadcast Service (CBS)[19] 3GPP TS 27.007 (GSM 07.07):AT command set for User Equipment (UE)[20] 3GPP TS 27.060 (GSM 07.60): Mobile Station (MS) supporting Packet Switched Services[21] 3GPP TS 51.011 (GSM 11.11): Specification of the Subscriber Identity Module - Mobile Equipment (SIM -ME) interface[22] 3GPP TS 11.14 (GSM 11.14): Specification of the SIM Application Toolkit for the Subscriber Identity Module- Mobile Equipment (SIM - ME) interfaceMC35i_ATC_V02.00nConfidential / ReleasedPage 13 of 3909/10/08