MC35i AT Command Set

MC35i AT Command Set4.6 AT+ILRR4.6 AT+ILRR Set TE-TA local rate reportingThe command AT+ILRR controls whether or not the intermediate result code "+ILRR" is transmitted from theDCE to the DTE when a connection is set up. The result code indicates the local rate. It is reported before thefinal result code of the connection, e.g. CONNECT, is transmitted to the TE.SyntaxTest CommandAT+ILRR=?Response(s)+ILRR: (list of supported s)OKRead CommandAT+ILRR?Response(s)+ILRR: OKWrite CommandAT+ILRR=Response(s)OKERROR+CME ERRORReference(s) PIN ASC0 MUX1 MUX2 MUX3 LastV.250 % % % ! ! ! !Intermediate Result Code+ILRR: Indicates local port rate setting upon connection setup.Parameter Description (num)(&W)(&V)0 (&F) Disables reporting of local port rate1 Enables reporting of local port rate (num) 9/10/08Port rate setting on connection (bps)0 Autobauding (see Section 4.7.1, Autobauding)300600120024004800960014400MC35i_ATC_V02.00nConfidential / ReleasedPage 81 of 390