MC35i AT Command Set

MC35i AT Command Set2.5 ATV2.5 ATV Set result code format modeThis command determines the contents of header and trailer transmitted with AT command result codes andinformation responses. Possible responses are described in Section 2.5.1, Verbose and numeric result codes.SyntaxExec CommandATV[]Response(s)OKERRORReference(s) PIN ASC0 MUX1 MUX2 MUX3 LastV.250 ! % % % % ! !Parameter Description (num)(&W)(&V)[0] Information response: Short result code format: 1 (&F) Information response: Long result code format: 2.5.1 Verbose and numeric result codesVerbose format Numeric format MeaningOK 0 Command executed, no errorsCONNECT 1 Link establishedRING 2 Ring detectedNO CARRIER 3 Link not established or disconnectedERROR 4 Invalid command or command line too longNO DIALTONE 6 No dial tone, dialling impossible, wrong modeBUSY 7 Remote station busyCONNECT 2400/RLP 47 Link with 2400 bps and Radio Link ProtocolCONNECT 4800/RLP 48 Link with 4800 bps and Radio Link ProtocolCONNECT 9600/RLP 49 Link with 9600 bps and Radio Link ProtocolCONNECT 14400/RLP 50 Link with 14400 bps and Radio Link ProtocolALERTINGDIALINGAlerting at called phoneMobile phone is dialingMC35i_ATC_V02.00nConfidential / ReleasedPage 32 of 3909/10/08