MC35i AT Command Set

MC35i AT Command Set3.4 AT+CEER3.4.11 release cause for Session Management (SM)NumberDescription3 The MS has not got any answer to the ACTIVATE PDP CONTEXT request message sent fivetimes to the network4 A MT PDP context which is active or in the activation process is deactivated because anotherMT PDP context with the same TI is requested by the network to be activated5 A MT PDP context which is active or in the activation process is deactivated because anotherMT PDP context with the same TI is requested by the network to be activated. The activationrequest is rejected by the SM sending the cause 'insufficient resources' to the networkbecause the SM was not able to perform the necessary comparisons for a static PDP addresscollision detection.6 A MT PDP context which is active or in the activation process is deactivated because anotherMT PDP context with the same TI is requested by the network to be activated. As a static PDPaddress collision with an MO activating PDP context has been detected by the SM the SM discardsthe activation request7 A MT PDP context request has been indicated but could not be processed in time. The activationrequest is rejected by the SM sending the cause 'insufficient resources' to the network.3.4.12 GSM cause for L3 Protocol module or other local causeNumber Description2 No detailed cause3.4.13 release cause for GPRS APINumber Description0 Regular deactivation of the call1 Action temporarily not allowed2 Wrong connection type3 Specified data service profile invalid4 PDP type or address is unknown5 FDN Check was not successful; GPRS Attach and PDP Context Activation blocked255 Undefined3.4.14 release cause for PPP/IP-StackNumber Description0 Regular call deactivation1 LCP stopped255 UndefinedMC35i_ATC_V02.00nConfidential / ReleasedPage 71 of 3909/10/08