MC35i AT Command Set

MC35i AT Command Set13.3 AT^SSET13.3 AT^SSET Indicate SIM data readyAfter power-up and personalization (PIN entry if required) the ME starts reading data from SIM. The AT^SSETcommand controls the presentation of the "^SSIM READY" URC which indicates, on the corresponding serialchannel, when the ME has finished reading SIM data. Afterwards all commands that depend on SIM data fieldscan be used, e.g. SMS and phonebook commands. See Section 19.1, Restricted access to SIM data after SIMPIN authentication for further detail.SyntaxTest CommandAT^SSET=?Response(s)^SSET:(list of supported s)OKRead CommandAT^SSET?Response(s)^SSET: OKERROR+CME ERROR: Write CommandAT^SSET=[]Response(s)OKERROR+CME ERROR: Reference(s) PIN ASC0 MUX1 MUX2 MUX3 Last-- ! % % % % ! !Unsolicited Result Code^SSIM READYThe URC acknowledges to the user that SIM data is accessible. Before that, any attempt to access a phonebook,view SMS or access SIM data will result in "+CME ERROR: 14" (SIM busy).Parameter Description (num)(&W)(&V) 9/10/08URC presentation mode0 (&F) Disable URC "^SSIM READY" indication.1 Enable URC "^SSIM READY" indication.MC35i_ATC_V02.00nConfidential / ReleasedPage 295 of 390