MC35i AT Command Set

MC35i AT Command Set7.15 ATS107.15 ATS10 Set disconnect delay after indicating the absence of datacarrierSyntaxRead CommandATS10?Response(s)OKWrite CommandATS10=Response(s)OKERRORReference(s) PIN ASC0 MUX1 MUX2 MUX3 LastV.250 ! % % ! ! ! !Command DescriptionThis parameter setting determines the amount of time, that the TA remains connected in absence of a data carrier.If the data carrier is detected before disconnect, the TA remains connected.Parameter Description (num)(&W)(&V) 9/10/08number of tenths of seconds of delay001...2 (&F) ...254MC35i_ATC_V02.00nConfidential / ReleasedPage 133 of 390